LSM330DLC Datasheet, PDF (18/66 Pages) STMicroelectronics – iNEMO inertial module: 3D accelerometer and 3D gyroscope

Module specifications
LSM330DLC
2.5
Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 8.
Symbol
Absolute maximum ratings⁽¹⁾
Ratings
Maximum value
Unit
Vdd Supply voltage
-0.3 to 4.8
V
Vdd_IO I/O pins supply voltage
-0.3 to 4.8
V
Input voltage on any control pin (SCL_A/G, SDA_A/G,
Vin
-0.3 to Vdd_IO +0.3 V
SDO_A, SDO_G, CS_A, CS_G, DEN_G)
A_POW Acceleration (any axis, powered, Vdd = 3 V)
3000 g for 0.5 ms
10000 g for 0.1 ms
A_UNP Acceleration (any axis, unpowered)
3000 g for 0.5 ms
10000 g for 0.1 ms
T_OP
T_STG
ESD
Operating temperature range
Storage temperature range
Electrostatic discharge protection
-40 to +85
°C
-40 to +125
°C
2 (HBM)
kV
1. Supply voltage on any pin should never exceed 4.8 V.
This is a mechanical shock sensitive device, improper handling can cause permanent
damage to the part.
This is an ESD sensitive device, improper handling can cause permanent damage to
the part.
18/66
Doc ID 022162 Rev 2