LSM330DLC Datasheet, PDF (1/66 Pages) STMicroelectronics – iNEMO inertial module: 3D accelerometer and 3D gyroscope

LSM330DLC
iNEMO inertial module:
3D accelerometer and 3D gyroscope
Datasheet — production data
Features
■ Analog supply voltage: 2.4 V to 3.6 V
■ Digital supply voltage IOs: 1.8 V
■ Low power mode
■ Power-down mode
■ 3 independent acceleration channels and 3
angular rate channels
■ ±2 g/±4 g/±8 g/±16 g dynamically selectable
full scale
■ ±250/±500/±2000 dps dynamically selectable
full scale
■ SPI/I²C serial interface (16-bit data output)
■ Programmable interrupt generator for free-fall
and motion detection
■ ECOPACK^® RoHS and “Green” compliant
Application
■ GPS navigation systems
■ Impact recognition and logging
■ Gaming and virtual reality input devices
■ Motion activated functions
■ Intelligent power saving for handheld devices
■ Vibration monitoring and compensation
■ Free-fall detection
■ 6D orientation detection
Description
The LSM330DLC is a system-in-package
featuring a 3D digital accelerometer and a 3D
digital gyroscope.
ST’s family of MEMS sensor modules leverages
the robust and mature manufacturing processes
already used for the production of micromachined
accelerometers.
LGA-28L (4x5x1.1 mm)
The various sensing elements are manufactured
using specialized micromachining processes,
while the IC interfaces are developed using a
CMOS technology that allows the design of a
dedicated circuit which is trimmed to better match
the sensing element characteristics.
The LSM330DLC has dynamically user-
selectable full scale acceleration range of
±2 g/±4 g/±8 g/±16 g and angular rate of
±250/±500/±2000 deg/sec.
The accelerometer and gyroscope sensors can
be either activated or separately put in Low
power/Power-down mode for applications
optimized for power saving.
The LSM330DLC is available in a plastic land grid
array (LGA) package.
Table 1. Device summary
Part number
Temperature
range [°C]
Package
Packing
LSM330DLC
LSM330DLCTR
-40 to +85
-40 to +85
LGA-28L ^Tray
(4x5x1.1 _Tape
mm) _{and reel}
September 2012
This is information on a product in full production.
Doc ID 022162 Rev 2
1/66
www.st.com
66