LAN9215_12 Datasheet, PDF (144/144 Pages) SMSC Corporation – 16-bit Non-PCI 10/100 Ethernet Controller with HP Auto-MDIX Support

16-bit Non-PCI 10/100 Ethernet Controller with HP Auto-MDIX Support
Datasheet
Table 9.1 Customer Revision History (continued)
REVISION LEVEL & DATE SECTION/FIGURE/ENTRY
CORRECTION
Rev. 2.2
(06-19-08)
Rev. 2.2
(06-10-08)
Rev. 2.1
(05-13-08)
Rev. 2.0
(04-11-08)
Rev. 1.92
(10-22-07)
Figure 1.2, "Internal Block
Diagram"
Diagram redone. The second PLL regulator was
added to the diagram.
The word “Core” was added to the regulator block
title.
Added note to VDD_CORE/VDD18CORE and
VDD_PLL that states “These pins must not be
used to supply power to other external devices.”
Auto-negotiation
Bits 9 and 15 relabeled as Reserved, Read-Only
Advertisement on page 115 (RO), with a default of 0.
Auto-negotiation
Advertisement on page 115
Fixed definition of bits 11:10 when equal to “11” by
adding “advertise support for..” to beginning of
definition. Also added note stating “When both
symmetric PAUSE and asymmetric PAUSE
support are advertised, the device will only be
configured to, at most, one of the two settings
upon auto-negotiation completion.”
Section 3.5, "Wake-up
Frame Detection," on
page 30 and Section 5.4.1,
"MAC_CR—MAC Control
Register," on page 102
Added note: “When wake-up frame detection is
enabled via the WUEN bit of the WUCSR—Wake-
up Control and Status Register, a broadcast wake-
up frame will wake-up the device despite the state
of the Disable Broadcast Frame (BCAST) bit in the
MAC_CR—MAC Control Register.”
Section 5.4.12,
"WUCSR—Wake-up Control
and Status Register," on
page 111
Fixed typo in bit 9: “... Mac Address [1:0] bit set to
0.” was changed to “...Mac Address [0] bit set to 0.”
Section 1.1, "Block
Diagram"
Removed the system memory block and arrow
above the microprocessor/ microcontroller
Section 7.6, "DC Electrical Input leakage current values added
Specifications," on page 137
Chapter 2 Pin Description
and Configurationon
page 15
Pin assignment information re-organized into
separate table.
Chapter 2 Pin Description
and Configurationon
page 15, Chapter 8,
"Package Outline," on
page 140, cover, and
ordering code
100-LFBGA package option added.
EECLK pin description in
Chapter 2 Pin Description
and Configurationon
page 15
Note added to EECLK pin description to indicate
proper usage.
Revision 2.9 (03-01-12)
144
DATASHEET
SMSC LAN9215