LAN9215_12 Datasheet, PDF (14/144 Pages) SMSC Corporation – 16-bit Non-PCI 10/100 Ethernet Controller with HP Auto-MDIX Support

1.12
1.13
16-bit Non-PCI 10/100 Ethernet Controller with HP Auto-MDIX Support
Datasheet
Host Bus Interface (SRAM Interface)
The host bus interface provides a FIFO interface for the transmit and receive data paths, as well as
an interface for the LAN9215 Control and Status Registers (CSR’s).
The host bus interface is the primary bus for connection to the embedded host system. This interface
models an asynchronous SRAM. TX FIFO, RX FIFO, and CSR’s are accessed through this interface.
Programmed I/O transactions are supported.
The LAN9215 host bus interface supports 16-bit bus transfers. Internally, all data paths are 32-bits
wide. The LAN9215 can be interfaced to either Big-Endian or Little-Endian processors.
External MII Interface
The LAN9215 also supports the ability to interface to an external PHY device. This interface is
compatible with all IEEE 802.3 MII compliant physical layer devices. For additional information on the
MII interface and associated signals, please refer to Section 3.11, "MII Interface - External MII
Switching," on page 46 for more information.
Revision 2.9 (03-01-12)
14
DATASHEET
SMSC LAN9215