SDA9254-2 Datasheet, PDF (9/32 Pages) Siemens Semiconductor Group – 2.6 MBit Dynamic Sequential Access Memory for Television Applications (TV-SAM) with On-chip Noise Reduction Filter

SDA 9254-2
The beginning of a block of 16 serial data at port A or B is determined by RA and RB, respectively.
The end of the serial input data block at port C is controlled by WT. Since RA, RB and WT can be
independently chosen (except for small forbidden time windows when memory transfers are
executed), the serial data streams can be shifted against each other without influencing the RE
cycles.
For activated noise reduction the timing restrictions for RB and WT must be considered (see Data
Transfer from latch B to Shift Register B).
Semiconductor Group
9
1998-01-16