SDA9254-2 Datasheet, PDF (18/32 Pages) Siemens Semiconductor Group – 2.6 MBit Dynamic Sequential Access Memory for Television Applications (TV-SAM) with On-chip Noise Reduction Filter

SDA 9254-2
AC Characteristics (cont’d)
V_DD = 5 V ± 10 %; T_A = 0 to 70 °C
Parameter
Symbol
Limit Values
min. typ. max.
WT to RE lead time t_WRL
30
RE to WT lead time t_RWL
50
Output buffer turn- t_OFF
0
20
off delay
WT to SCB delay t_WTD
0
time
WT to SCB lead
t_WTL
15
time
WT pulse width
t_WTP
10
OEA to output A
t_OAA
25
access time
Access time from t_CAA
25
SCA
Access time from t_CBA
25
SCB
Data input set-up t_DS
5
time to SCB
Data input hold time t_DH
6
to SCB
OEDLO to output t_ODA
25
DLO access time
Unit Test Condition
ns
t_WRL and t_RWL are restrictive
operating parameters only
in memory write transfer
cycles. In that case t_WRL
applies if the write transfer
from shifter C to latch C
occurs before the rising
edge of RE. Otherwise t_RWL
has to be satisfied.
See diagram 4
ns See WT to RE lead time
ns
t_OFF (max) defines the time
at which the output
achieves the open-circuit
condition and is not
referenced to output
voltages levels.
ns See diagram 4
ns See diagram 4
ns See diagram 4
ns See diagram 2, 5
ns See diagram 2
ns See diagram 3, 7
ns See diagram 5, 7
ns See diagram 5, 7
ns See diagram 7
Semiconductor Group
18
1998-01-16