GS2972 Datasheet, PDF (121/125 Pages) Semtech Corporation – 3G/HD/SD-SDI Serializer with Complete SMPTE Audio & Video Support

6. References & Relevant Standards
SMPTE ST 125 Component video signal 4:2:2 – bit parallel interface
SMPTE ST 259-C
10-bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital
Interface
SMPTE ST 260
1125 / 60 high definition production system – digital representation and
bit parallel interface
SMPTE ST 267
Bit parallel digital interface – component video signal 4:2:2 16 x 9 aspect
ratio
SMPTE ST 272
SMPTE ST 274
SMPTE ST 291
SMPTE ST 292
SMPTE ST 293
SMPTE ST 296
Formatting AES/EBU Audio and Auxiliary Data into Digital Video Ancillary
Data Space
1920 x 1080 scanning analog and parallel digital interfaces for multiple
picture rates
Ancillary Data Packet and Space Formatting
Bit-Serial Digital Interface for High-Definition Television Systems
720 x 483 active line at 59.94Hz progressive scan production – digital
representation
1280 x 720 scanning, analog and digital representation and analog
interface
SMPTE ST 299
SMPTE ST 305
SMPTE ST 348
SMPTE ST 352
SMPTE ST 372
SMPTE ST 424
SMPTE ST 425
SMPTE RP165
SMPTE RP168
CEA 861
24-Bit Digital Audio Format for HDTV Bit-Serial Interface
Serial Data Transport Interface
High Data-Rate Serial Data Transport Interface (HD-SDTI)
Video Payload Identification for Digital Television Interfaces
Dual Link ST 292 Interface for 1920 x 1080 Picture Raster
3Gb/s Signal/Data Serial Interface
3Gb/s Signal/Data Serial Interface - Source Image Format Mapping
Error Detection Checkwords and Status Flags for use in Bit-Serial Digital
Interfaces for Television
Definition of Vertical Interval Switching Point for Synchronous Video
Switching
Video Timing Requirements
GS2972 3G/HD/SD-SDI Serializer with Complete
SMPTE Audio & Video Support
Final Data Sheet Rev. 9
GENDOC-047479 September 2013
www.semtech.com
121 of 125