S6A0092 Datasheet, PDF (5/54 Pages) Samsung semiconductor – 80 SEG / 26 COM DRIVER & CONTROLLER FOR STN LCD

80 COM / 26 COM DRIVER & CONTROLLER FOR STN LCD
S6A0092
INTRODUCTION
The S6A0092 is an LCD driver and controller LSI for liquid crystal dot matrix character display systems. It can
display 2 or 3 lines of 16 characters with 5 x 8 dots format. It is capable of interfacing various microprocessors,
supporting the 4-bit, 8-bit parallel modes and the clock synchronized serial mode. Voltage converter, oscillator,
voltage regulator, voltage follower and bias circuit are built in the IC. The double height character mode and line
vertical scroll functions are supported.
FEATURES
Driver Outputs
- Common outputs: 26 common
- Segment outputs: 80 segment
Applicable Panel Size
Font
5x8
Display
2-line x 16 characters
3-line x 16 characters
Duty
1 / 17
1 / 25
Contents of outputs
2 x 16 characters + 80 icons
3 x 16 characters + 80 icons
Internal Memory
- Character Generator ROM (CGROM): 10,240 bits (256 characters x 5 x 8 dots)
- Character Generator RAM (CGRAM): 320 bits (8 characters x 5 x 8 dots)
- Display Data RAM (DDRAM): 512 bits (16 characters x 4 lines)
- Segment Icon RAM (ICONRAM): 80 bits (80 icons)
MPU Interface
- No busy MPU interface (no busy check or no execution waiting time)
- 8-bit parallel interface mode: 68-series and 80-series are available
- 4-bit parallel interface mode: 68-series and 80-series are available
- Serial interface mode: 4 pins clock synchronized serial interface
Function Set
- Various instruction set: display control, power save, power control, etc.
- COM / SEG bi-directional (4-type LCD application available)
- H/W reset (RESETB)
Built-in Analog Circuit
- Internal RC oscillator circuit or external clock
- Electronic volume for contrast control (32 steps)
- Voltage converter / voltage regulator / voltage follower & bias circuit
Low Power Operation
- Sleep mode operation (5µA Max.)
- Normal mode operation (80µA Max.)
1