H8S2138 Datasheet, PDF (796/1061 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2100 Series

Section 25 Electrical Characteristics
3. IRQ2 includes the ADTRG signal multiplexed on that pin.
4. P52/SCK0/SCL0 and P97/SDA0 are NMOS push-pull outputs in H8S/2138.
An external pull-up resistor is necessary to provide high-level output from SCL0 and
SDA0 (ICE = 1).
P52/SCK0 and P97 (ICE = 0) high levels are driven by NMOS in H8S/2138.
5. When ICE = 0. Low-level output when the bus drive function is selected is determined
separately.
6. The upper limit of the port 6 applied voltage is V +0.3 V when CIN input is not
CC
selected, and the lower of V_CC +0.3 V and AV_CC +0.3 V when CIN input is selected.
When a pin is in output mode, the output voltage is equivalent to the applied voltage.
7. For flash memory program/erase operations, the applicable ranges are V_CC = 3.0 V to
3.6 V.
8. Current dissipation values are for V_IH min = V_CC –0.2 V and V_IL max = 0.2 V with all
output pins unloaded and the on-chip pull-up MOSs in the off state.
9. The values are for V_RAM ≤ V_CC < 2.7 V, V_IH min = V_CC –0.2 V, and V_IL max = 0.2 V.
Rev. 4.00 Jun 06, 2006 page 742 of 1004
REJ09B0301-0400