H8S2117 Datasheet, PDF (696/968 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family / H8S/2100 Series

Section 20 A/D Converter
AN0 to AN15
10 kΩ
To A/D converter
20 pF
Note: Values are reference values.
Figure 20.7 Analog Input Pin Equivalent Circuit
20.7.7 Module Stop Mode Setting
When this LSI enters software standby mode with A/D conversion enabled, the analog inputs are
retained, and the analog power supply current is equal to the current as during A/D conversion. If
the analog power supply current needs to be reduced in software standby mode, clear the ADST,
TRGS1, and TRGS0 bits all to 0 to disable A/D conversion.
Rev. 2.00 Feb. 20, 2008 Page 672 of 940
REJ09B0350-0200