RX111_16 Datasheet, PDF (51/127 Pages) Renesas Technology Corp – 32 MHz 32-bit RX MCUs, 50 DMIPS, up to 512 Kbytes of flash memory

RX111 Group
5. Electrical Characteristics
Table 5.4 DC Characteristics (2)
Conditions: 1.8 V ≤ VCC = VCC_USB < 2.7 V, 1.8 V ≤ AVSS0 < 2.7 V, VSS = AVSS0 = VSS_USB = 0 V, T_a = –40 to +105°C
Item
Symbol
Min.
Typ.
Max.
Unit
Test
Conditions
Schmitt trigger
Ports P16, P17, port PA6, port PB0
V_IH
VCC × 0.8
—
input voltage
(5 V tolerant)
5.8
V
Ports P03, P05,
ports P14,P15,
ports P26, P27,
ports P30 to P32, P35,
ports P54, P55,
ports PA0, PA1, PA3, PA4,
ports PB1, PB3, PB5 to PB7,
ports PC2 to PC7,
ports PE0 to PE7,
port PH7,
RES#
VCC × 0.8
—
VCC + 0.3
All pins
–0.3
—
VCC × 0.2
Input voltage
(except for Schmitt
trigger input pins)
All pins
MD
XTAL (external clock input)
Ports P40 to P44, P46, ports PJ6,
PJ7
∆V_T
VCC × 0.01
—
V_IH
VCC × 0.9
—
VCC × 0.8
—
—
VCC + 0.3
V
VCC + 0.3
AVCC0 × 0.7
—
AVCC0 + 0.3
MD
XTAL (external clock input)
V_IL
–0.3
–0.3
—
VCC × 0.1
—
VCC × 0.2
Ports P40 to P44, P46, ports PJ6,
PJ7
–0.3
—
AVCC0 × 0.3
Table 5.5 DC Characteristics (3)
Conditions: 1.8 V ≤ VCC = VCC_USB ≤ 3.6 V, 1.8 V ≤ AVSS0 ≤ 3.6 V, VSS = AVSS0 = VSS_USB = 0 V, T_a = –40 to +105°C
Item
Symbol Min.
Typ.
Max. Unit Test Conditions
Input leakage
current
RES#, MD, port P35, port PH7
I_in
—
—
1.0
µA V_in = 0 V, VCC
Three-state
leakage current
(off-state)
Ports for 5 V tolerant
Pins other than above
I_TSI
—
—
1.0
µA V_in = 0 V, 5.8 V
—
—
1.0
V_in = 0 V, VCC
Input capacitance All input pins
C_in
—
—
15
pF V_in = 0 mV,
(except for port P16, port P35, USB0_DM,
Frequency: 1 MHz,
USB0_DP)
T_a = 25°C
Port P16, port P35, USB0_DM, USB0_DP
—
—
30
Table 5.6 DC Characteristics (4)
Conditions: 1.8 V ≤ VCC = VCC_USB ≤ 3.6 V, 1.8 V ≤ AVSS0 ≤ 3.6 V, VSS = AVSS0 = VSS_USB = 0 V, T_a = –40 to +105°C
Item
Symbol Min.
Typ.
Max. Unit Test Conditions
Input pull-up
resistor
All ports
(except for port P35, port PH7)
R_U
10
20
100
kΩ V_in = 0 V
R01DS0190EJ0130 Rev.1.30
May 31, 2016
Page 51 of 127