RX111_16 Datasheet, PDF (12/127 Pages) Renesas Technology Corp – 32 MHz 32-bit RX MCUs, 50 DMIPS, up to 512 Kbytes of flash memory

RX111 Group
1. Overview
Table 1.4
Pin Functions (3/3)
Classifications Pin Name
I/O
Description
USB 2.0 host/ USB0_DP
function module _{USB0_DM}
I/O
D+ I/O pin of the USB on-chip transceiver.
I/O
D- I/O pin of the USB on-chip transceiver.
USB0_VBUS
USB0_EXICEN
Input USB cable connection monitor pin.
Output Low-power control signal for the OTG chip.
USB0_VBUSEN
Output VBUS (5 V) supply enable signal for the OTG chip.
USB0_OVRCURA,
USB0_OVRCURB
USB0_ID
Input External overcurrent detection pins.
Input Mini-AB connector ID input pin during operation in OTG mode.
12-bit A/D
converter
AN000 to AN004, AN006,
AN008 to AN015
Input
Input pins for the analog signals to be processed by the A/D converter.
D/A converter
ADTRG0#
DA0, DA1
Input Input pin for the external trigger signals that start the A/D conversion.
Output Output pins for the analog signals to be processed by the D/A converter.
I/O ports
P03, P05
P14 to P17
I/O
2-bit input/output pins.
I/O
4-bit input/output pins.
P26, P27
P30 to P32, P35
P40 to P44, P46
I/O
2-bit input/output pins.
I/O
4-bit input/output pins (P35 input pin).
I/O
6-bit input/output pins.
P54, P55
I/O
PA0, PA1, PA3, PA4, PA6 I/O
2-bit input/output pins.
5-bit input/output pins.
PB0, PB1, PB3, PB5 to PB7 I/O
6-bit input/output pins.
PC0 to PC7
PE0 to PE7
I/O
8-bit input/output pins.
I/O
8-bit input/output pins.
PH7
PJ6, PJ7
Note 1. For external clock input.
Input
I/O
1-bit input pin.
2-bit input/output pins.
R01DS0190EJ0130 Rev.1.30
May 31, 2016
Page 12 of 127