R0E00008AKCE00EP52 Datasheet, PDF (5/43 Pages) Renesas Technology Corp – Microcomputer Development Environment System

E8a Emulator
2. E8a Emulator Specifications
2. E8a Emulator Specifications
2.1 Emulator specifications
Table 2.1 shows the E8a emulator specifications for the R32C/100 Series.
Table 2.1 E8a Emulator Specifications for the R32C/100 Series
Target MCUs
Available operating modes
Power voltages
Debug functions
Break functions
Trace functions
Flash memory programming function
User interface
R32C/160, R32C/161
Other Groups
MCU resources to R32C/160, R32C/161
be used
R32C/111, R32C/116,
R32C/117, R32C/118,
R32C/120, R32C/121,
R32C/151, R32C/152,
R32C/153, R32C/156,
R32C/157
M16C Family R32C/100 Series
R32C/111 (100-pin), R32C/116, R32C/117, R32C/118, R32C/151, R32C/152,
R32C/153, R32C/156, R32C/157, R32C/160 and R32C/161 Groups
(R32C/120 and R32C/121 Groups [*1])
Single-chip mode, Memory expansion mode
* Microprocessor mode is not supported.
3.0 - 5.5V
- Address match break, 8 points
- PC break points (maximum 255 points)
- Forced break
None
Available
Clock-synchronous serial (communication via P44/P45/P46/P47)
Clock-synchronous serial (communication via P64/P65/P66/P67)
- ROM size: 3 KB
- RAM size: 364 bytes
- Stack 32 bytes
- Address match interrupt
- Pins P50 and P55
- UART1 function and P44/P45/P46/P47
- ROM size: 3 KB
- RAM size: 364 bytes
- Stack 32 bytes
- Address match interrupt
- Pins P50 and P55 [*2]
- UART1 function and P64/P65/P66/P67
Emulator power supply
Interface with host machine
Power supply function
Applicable emulator debugger
Unnecessary (USB bus powered, power supplied from the PC)
USB (USB 1.1, full speed)
* Also connectable to host computers that support USB 2.0
* Operation with all combinations of host machine, USB device and USB hub is not
guaranteed for the USB interface.
Can supply 3.3 V or 5.0 V to the user system (maximum 300 mA)
R32C E8a Emulator Debugger V.1.00.01 or later
Notes
[*1] For these MCUs, the operations have been verified with the working sample MCUs only.
[*2] For 64-pin and 80-pin version of the R32C/111 Group, the E8a emulator uses pins P80 and P81 instead of pins P50
and P55.
REJ10J1877-0201 Rev.2.01 Jun. 26, 2009
Page 5 of 43