R0E00008AKCE00EP52 Datasheet, PDF (27/43 Pages) Renesas Technology Corp – Microcomputer Development Environment System

E8a emulator
5. Emulator Debugger Setting
5. Emulator Debugger Setting
5.1 [Emulator Setting] dialog box
The [Emulator Setting] dialog box is provided for setting items that need to be set when the debugger is launched. The
contents set from this dialog box (excluding [Power Supply] group box items) also become valid the next time the
debugger is launched. When launching the debugger for the first time after creating a new project work space, the
[Emulator Setting] dialog box is displayed with the Wizard.
Figure 5.1 [Emulator Setting] Dialog Box
If you check “Do not show this dialog box again.” at the bottom of the [Emulator Setting] dialog box, the [Emulator
Setting] dialog box will not be displayed the next time the debugger is launched.
You can open the [Emulator Setting] dialog box using one of the following methods:
- After the debugger is launched, select Menu -> [Setup] -> [Emulator] -> [Emulator Setting...].
- Hold down the Ctrl key while launching the debugger.
When “Do not show this dialog box again.” is checked, the E8a does not supply power to the user system.
REJ10J1877-0201 Rev.2.01 Jun. 26, 2009
Page 27 of 43