R0E00008AKCE00EP52 Datasheet, PDF (28/43 Pages) Renesas Technology Corp – Microcomputer Development Environment System

E8a emulator
5. Emulator Debugger Setting
5.2 [Emulator mode] tab
Device selection, mode specification and power supply setting are made from the [Emulator mode] tab of the [Emulator
Setting] dialog box.
[MCU Group]
Select the name of the MCU group to be used
from the [MCU Group] drop-down list.
[Device]
Select the type of MCU to be used from the
[Device] drop-down list.
[Mode]
Select the mode to be used.
For details, see “5.2 (1) Selecting the Mode”
(p.29).
[Power supply]
Select the power supply to the user system.
- When supplying power to the user system from
the E8a, click the [Power Target from
Emulator. (MAX 300mA)] checkbox.
Note that when debugging the system which
operates the MCU with a dual power supply,
power cannot be supplied from the E8a.
Figure 5.2 [Emulator mode] Tab of [Emulator Setting] Dialog Box
REJ10J1877-0201 Rev.2.01 Jun. 26, 2009
Page 28 of 43