R0E00008AKCE00EP52 Datasheet, PDF (33/43 Pages) Renesas Technology Corp – Microcomputer Development Environment System

E8a Emulator
6. Notes on Using the E8a Emulator
(3) Registers initialized by the E8a emulator
When the system is launched, the E8a emulator initializes the general registers and some of the flag registers as shown in
Table 6.2.
Table 6.2 E8a Emulator Register Initial Values
Status
E8a Emulator
Activation
Register
R0 to R7 (bank 0, 1)
A0 to A3 (bank 0, 1)
0000h
00000000h
Initial Value
FB (bank 0, 1)
00000000h
SB (bank 0, 1)
00000000h
PC
INTB (bank 0, 1)
USP
Reset vector value in the vector address table
00000000h
00000000h
ISP
Work RAM Address for the E8a emulator + 180h [*1]
SVF
00000000h
SVP
00000000h
VCT
00000000h
DMD0 to DMD3
XXXX XXXX XXXX XXXX XXXX XXXX XX00 0000b
DCT0 to DCT3
000000h
DCR0 to DCR3
000000h
DSA0 to DSA3
00000000h
DSR0 to DSR3
00000000h
DDA0 to DDA3
00000000h
DDR0 to DDR3
00000000h
Note
[*1] The Work RAM address for the E8a emulator is specified in the [Firmware Location] tab of the [Emulator Setting]
dialog box.
REJ10J1877-0201 Rev.2.01 Jun. 26, 2009
Page 33 of 43