PD16782A_15 Datasheet, PDF (24/29 Pages) Renesas Technology Corp – SOURCE DRIVER FOR 300/288-OUTPUT TFT-LCD

µPD16782A
Electrical Characteristics (TA = −30 to +85°C, VDD1 = 3.0 to 5.5 V, VDD2 = 5.0 V ± 0.5 V, VSS1 = VSS2 = 0 V)
Parameter
Symbol
Condition
MIN.
TYP.
MAX.
Unit
Maximum video signal output voltage VVOH
VDD2 − 0.2
V
Minimum video signal output voltage VVOL
0.2
V
Logic high level output voltage
VLOH
STHL, STHR pins, IOH = −1.0 mA
0.9 VDD1
V
Logic low level output voltage
VLOL
Video signal high level output current IVOH
STHL, STHR pins, IOL = 1.0 mA
INH = L, VOF = VDD2 − 1.0 V,
VO = VDD2 − 0.5 V
0.1 VDD1
V
−0.20
−0.08
mA
Video signal low level output current IVOL
INH = L, VOF = 1.0 V, VO = 0.5 V
0.08
0.20
mA
Reference voltage 1
Reference voltage 2
Reference voltage 3
★ Output voltage deviation 1
★ Output voltage deviation 2
★ Output voltage deviation 3
VREF1
VREF2
VREF3
∆VVO1
∆VVO2
∆VVO3
VDD2 = 5.0 V, TA = 25°C, VVI = 0.5 V
VDD2 = 5.0 V, TA = 25°C, VVI = 2.0 V
VDD2 = 5.0 V, TA = 25°C, VVI = 3.5 V
VDD2 = 5.0 V, TA = 25°C, VVI = 0.5 V
VDD2 = 5.0 V, TA = 25°C, VVI = 2.0 V
VDD2 = 5.0 V, TA = 25°C, VVI = 3.5 V
0.49
V
1.99
V
3.49
V
±30
mV
±30
mV
±30
mV
Logic input leakage current
Video input leakage current
ILL
Logic input except Osel
Osel, VI = VDD = 3.3 V
IVL
±1.0
µA
90
µA
±10
µA
Logic dynamic current consumption IDD1
fCLI = 14 MHz VDD1 = 3.3 ± 0.3 V
3
mA
VVI = 2.0 V,
no load,
fINH = 15.4 kHz,
PWINH = 5.0 µs
VDD1 = 5.0 ± 0.5 V
4.5
mA
Driver dynamic current consumption IDD2
fCLI = 14 MHz
12
mA
VVI = 2.0 V,
no load,
fINH = 15.4 kHz,
PWINH = 5.0 µs
Remarks 1. VOF: output applied voltage, VO: output voltage without load
2. The reference values are typical values only. The output deviation is only guaranteed within the chip.
22
Data Sheet S16593EJ1V0DS