QB-RL78L1C Datasheet, PDF (21/42 Pages) Renesas Technology Corp – In-Circuit Emulator

QB-RL78L1C In-Circuit Emulator
CHAPTER 2 SETUP PROCEDURE
Figure 2-1. Acrylic Board Removal Method
As an oscillator^Note to be mounted in the OSC1 socket in the emulator, use the one that satisfies the following
specifications.
- Supply voltage: 5.0 V
- Output level: CMOS
Note An oscillation circuit that uses a resonator cannot be used.
Figure 2-2. Oscillator Shape
Top View
Figure 2-3. Mapping of Oscillator to Socket
Remark Insert the oscillator into the socket, take care for the pin 1 position.
R20UT2703EJ0200 Rev.2.00
Jan 31, 2014
Page 21 of 42