QB-RL78L1C Datasheet, PDF (10/42 Pages) Renesas Technology Corp – In-Circuit Emulator

QB-RL78L1C In-Circuit Emulator
CHAPTER 1 GENERAL
(1) TCN1, TCN2, TCN3
These are connectors for connecting a check pin adapter or emulation probe.
(2) OSC1
This is a socket for mounting the oscillator.
(3) CN6, TCN4
These are connectors for the shipment inspection. User does not need to use these connectors.
(4) POWER (Red LED)
This is an LED that shows whether the power supply of the QB-RL78L1C is switched on.
LED State
Lit
Not lit
Blinking
QB-RL78L1C State
Power switch ON
Power switch OFF or AC adapter not connected to QB-RL78L1C
Internal error occurred (Contact an Renesas Electronics sales representative or
distributor)
(5) TARGET (Green LED)
This is an LED that shows whether the power supply of the target system is switched on.
LED State
Lit
Not lit
Target System State
Target system power supply ON
Target system power supply OFF or target system not connected
(6) Power switch
This is the power switch of the QB-RL78L1C.
It is OFF at shipment.
(7) Cooling fun
This is the cooling fun of the QB-RL78L1C.
It works when the power supply of the QB-RL78L1C is switched on.
R20UT2703EJ0200 Rev.2.00
Jan 31, 2014
Page 10 of 42