QB-RL78L1C Datasheet, PDF (12/42 Pages) Renesas Technology Corp – In-Circuit Emulator

QB-RL78L1C In-Circuit Emulator
1.4 System Configuration
CHAPTER 1 GENERAL
This section shows the system configuration when using the QB-RL78L1C connected to a PC (Windows^TM PC,
PC/AT^TM compatible). Connection is possible even without optional products.
Figure 1-2. System Configuration
<1>
<4>
<2>
<3>
<5>
<6>
< 11 >
< 12 >
<7>
<8>
<9>
< 10 >
< 13 >
<1> Host machine
<2> USB interface cable
<3> AC adapter
<4> QB-RL78L1C
<5> Check pin adapter (optional)
<6> Emulation probe
<7> Exchange adapter
<8> Space adapter (optional)
<9> YQ connector
<10> Target connector
<11> Mount adapter (optional)
<12> Device
<13> Target system
: Windows PC, IBM PC/AT compatible can be used
: Cable connecting QB-RL78L1C to host machine
: AC adapters classified by region
: This product
: Adapter used for monitoring waveforms with oscilloscope
: High-characteristic FPC type emulation probe
: Adapter that performs pin conversion
: Adapter used for height adjustment
: Connector that connects exchange adapter to target connector
: Connector soldered to target system
: Adapter used for mounting target device into socket
: Target device
R20UT2703EJ0200 Rev.2.00
Jan 31, 2014
Page 12 of 42