M16C30_02 Datasheet, PDF (153/178 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Electrical characteristics (Vcc = 5V)
Mitsubishi microcomputers
M16C / 30 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
VCC = 5V
Timing requirements (referenced to VCC = 5V, VSS = 0V at Topr = – 20^oC to 85^oC / – 40^oC to 85^oC (*)
unless otherwise specified)
* : Specify a product of -40°C to 85°C to use it.
Table 1.23.14. Timer B input (counter input in event counter mode)
Symbol
tc(TB)
tw(TBH)
tw(TBL)
tc(TB)
tw(TBH)
tw(TBL)
Parameter
TBiIN input cycle time (counted on one edge)
TBiIN input HIGH pulse width (counted on one edge)
TBiIN input LOW pulse width (counted on one edge)
TBiIN input cycle time (counted on both edges)
TBiIN input HIGH pulse width (counted on both edges)
TBiIN input LOW pulse width (counted on both edges)
Standard
Unit
Min.
Max.
100
ns
40
ns
40
ns
200
ns
80
ns
80
ns
Table 1.23.15. Timer B input (pulse period measurement mode)
Symbol
tc(TB)
tw(TBH)
tw(TBL)
Parameter
TBiIN input cycle time
TBiIN input HIGH pulse width
TBiIN input LOW pulse width
Standard
Unit
Min. Max.
400
ns
200
ns
200
ns
Table 1.23.16. Timer B input (pulse width measurement mode)
Symbol
tc(TB)
tw(TBH)
tw(TBL)
Parameter
TBiIN input cycle time
TBiIN input HIGH pulse width
TBiIN input LOW pulse width
Standard
Unit
Min.
Max.
400
ns
200
ns
200
ns
Table 1.23.17. A-D trigger input
Symbol
tc(AD)
tw(ADL)
Parameter
ADTRG input cycle time (trigger able minimum)
ADTRG input LOW pulse width
Standard
Unit
Min.
Max.
1000
ns
125
ns
Table 1.23.18. Serial I/O
Symbol
tc(CK)
tw(CKH)
tw(CKL)
td(C-Q)
th(C-Q)
tsu(D-C)
th(C-D)
Parameter
CLKi input cycle time
CLKi input HIGH pulse width
CLKi input LOW pulse width
TxDi output delay time
TxDi hold time
RxDi input setup time
RxDi input hold time
_______
Table 1.23.19. External interrupt INTi inputs
Symbol
tw(INH)
tw(INL)
INTi input HIGH pulse width
INTi input LOW pulse width
Parameter
Standard
Unit
Min.
Max.
200
ns
100
ns
100
ns
80
ns
0
ns
30
ns
90
ns
Standard
Unit
Min. Max.
250
ns
250
ns
152