CT5.241 Datasheet, PDF (16/21 Pages) PULS GmbH – 24V, 5A, TWO-PHASE INPUT

C-Series
CT5.241
24V, 5A, TWO-PHASE INPUT
22. ACCESSORIES
ZM1.WALL Wall mounting bracket
This bracket is used to mount specific Dimension units onto a flat surface without utilizing a DIN-Rail. The two
aluminum brackets and the black plastic slider of the unit have to be removed, so that the two steel brackets can be
mounted.
Fig. 22-1 ZM1.WALL Wall mounting bracket
Fig. 22-2 Assembled wall mounting bracket *)
*) Picture of the power supply is for representation only
ZM12.SIDE Side mounting bracket
This bracket is used to mount Dimension units sideways with or without utilizing a DIN-Rail. The two aluminum
brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can be mounted.
For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on
the steel bracket.
Fig. 22-3
ZM12.SIDE Side mounting bracket *)
Fig. 22-4
Side mounting with DIN-rail brackets *)
*) Picture of the power supply is for representation only
Jan. 2010 / Rev. 1.1 DS-CT5.241-EN
All parameters are specified at 24V, 5A, 400Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
16/21