CT5.241 Datasheet, PDF (14/21 Pages) PULS GmbH – 24V, 5A, TWO-PHASE INPUT

C-Series
CT5.241
24V, 5A, TWO-PHASE INPUT
18. APPROVALS
IEC 60950-1
UL 508
UL 60950-1
Marine,
pending
SEMI F47
IND. CONT. EQ.
CB Scheme,
Information Technology Equipment
Listed for use as Industrial Control Equipment;
U.S.A. (UL 508) and Canada (C22.2 No. 107-1-01);
E-File: E198865
Mains supply circuit: 3-wire + PE, star
Recognized for use as Information Technology Equipment;
U.S.A. (UL 60950-1) and Canada (C22.2 No. 60950);
E-File: E137006, Level 3
GL (Germanischer Lloyd) classified and
ABS (American Bureau for Shipping) PDA
Environmental category: C, EMC2
Marine and offshore applications
SEMI F47-0706
Ride-through compliance for the semiconductor industry.
maximal 24V, 2.5A for 380V and 400V mains and 24V, 5A for
480V mains
19. FULFILLED STANDARDS
EN 61558-2-17
EN/IEC 60204-1
EN/IEC 61131-2
EN 50178, IEC 62103
Safety of Power Transformers
Safety of Electrical Equipment of Machines
Programmable Controllers
Electronic Equipment in Power Installations
20. USED SUBSTANCES
The unit does not release any silicone and is suitable for the use in paint shops.
The unit conforms to the RoHS directive 2002/96/EC
Electrolytic capacitors included in this unit do not use electrolytes such as Quaternary Ammonium Salt Systems.
Plastic housings and other molded plastic materials are free of halogens, wires and cables are not PVC insulated.
The production material within our production does not include following toxic chemicals:
Polychlorized Biphenyl (PCB), Polychlorized Terphenyl (PCT), Pentachlorophenol (PCP), Polychlorinated naphthalene
(PCN), Polybrom Biphenyll (PBB), Polybrom Bipheny-oxyd (PBO), Polybrominated Diphenylether (PBDE), Polychlorinated
Diphenylether (PCDE), Polydibromphenyl Oxyd (PBDO), Cadmium, Asbestos, Mercury, Silicia
Jan. 2010 / Rev. 1.1 DS-CT5.241-EN
All parameters are specified at 24V, 5A, 400Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
14/21