TDA8594_15 Datasheet, PDF (46/49 Pages) NXP Semiconductors – I2C-bus controlled 4  50 W power amplifier

NXP Semiconductors
TDA8594
I²C-bus controlled 4  50 W power amplifier
18. Revision history
Table 19. Revision history
Document ID
Release date Data sheet status
Change notice
Supersedes
TDA8594 v.5
Modifications:
20130611
Product data sheet
-
• The package outline Figure 37 has been updated.
TDA8594_4
TDA8594 v.4
Modifications:
20130226
Product data sheet
-
TDA8594_3
• The data sheet template has been updated to the latest version.
TDA8594 v.3
Modifications:
20130221
Product data sheet
-
TDA8594_2
• The package outline figures, Figure 37 and Figure 38, have been updated.
TDA8594_2
Modifications:
20071211
Product data sheet
-
TDA8594_1
• The format of this data sheet has been redesigned to comply with the new identity guidelines
of NXP Semiconductors.
• Legal texts have been adapted to the new company name where appropriate.
• Section 2.1 and Section 14: Added device qualification “AEC-Q100 qualification”.
• Figure 1 and Figure 29: Changed internal circuit on pin SVR.
• Figure 32: Value of base-emitter resistor changed to 5.6 k.
• Table 17, Diagnostic:
– Symbols and parameters of “junction temperature” characteristics updated (4).
– (Old) symbol and parameter “I_oM = peak current output” changed to “I_{th(o)det(load)AC} =
AC load detection output threshold current”.
TDA8594_1
20060302
Product data sheet
-
-
(9397 750 15066)
TDA8594
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 11 June 2013
© NXP B.V. 2013. All rights reserved.
46 of 49