TDA8594_15 Datasheet, PDF (24/49 Pages) NXP Semiconductors – I2C-bus controlled 4  50 W power amplifier

NXP Semiconductors
TDA8594
I²C-bus controlled 4  50 W power amplifier
Table 12. Data byte DB2 …continued
Bit
Description
D5 and D4 channel 4 DC load or AC load detection
if bit IB1[D2] = 1, AC load detection is enabled, bit D5 is don’t care, bit D4 has the
following meaning
0 = no AC load
1 = AC load detected
if bit IB1[D2] = 0, AC load detection is disabled, bits D5 and D4 are available for
DC load detection
00 = normal load
01 = not valid
10 = line driver load
11 = open load
D3
channel 4 shorted load
0 = not shorted load
1 = shorted load
D2
channel 4 output offset
0 = no output offset
1 = output offset
D1
channel 4 short to V_P
0 = no short to V_P
1 = short to V_P
D0
channel 4 short to ground
0 = no short to ground
1 = short to ground
Table 13.
Bit
D7
D6
Data byte DB3
Description
maximum temperature protection
0 = no protection
1 = maximum temperature protection
speaker fault channel 1 (missing current)
0 = no missing current
1 = missing current
TDA8594
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 11 June 2013
© NXP B.V. 2013. All rights reserved.
24 of 49