SAA4992H Datasheet, PDF (10/36 Pages) NXP Semiconductors – Field and line rate converter with noise reduction

Philips Semiconductors
Field and line rate converter with noise
reduction
Product specification
SAA4992H
SYMBOL PIN TYPE
DESCRIPTION⁽¹⁾⁽²⁾
YB2
157 output bus B luminance output to field memory 2 bit 2
YB1
158 output bus B luminance output to field memory 2 bit 1
YB0
159 output bus B luminance output to field memory 2 bit 0 (LSB)
V_SSE
160 ground ground of output pads
Notes
1. Not used input pins (e.g. bus E) should be connected to ground.
2. Because of the noisy characteristic of the output pad supply it is recommended not to connect the core supply and
the output pad supply directly at the device. The output pad supply should be buffered as close as possible to the
device.
3. The external pull-up resistor should be 47 kΩ.
2000 Feb 04
10