PYTHON25K Datasheet, PDF (3/87 Pages) ON Semiconductor – PYTHON 25K/16K/12K/10K Global Shutter CMOS Image Sensors

NOIP1SN025KA, NOIP1SN016KA, NOIP1SN012KA, NOIP1SN010KA
Key Specifications
SPECIFICATIONS
Table 1. GENERAL SPECIFICATIONS
Parameter
Specification
Pixel Type
Global shutter pixel architecture
Shutter Type
Pipelined and triggered global
shutter
Optical Format
25K: APS−H
16K: APS−H
12K: 4/3”
10K: 4/3”
Frame Rate at Full
Resolution
80 frames per second @ 25K
120 frames per second @ 16K
160 frames per second @ 12K
175 frames per second @ 10K
Master Clock
360 MHz
Windowing
ADC Resolution ^{(Note 1)}
32 Randomly programmable
windows. Normal, sub-sampled
and binned readout modes
10-bit
LVDS Outputs
32 data + 1 sync + 1 clock
Data Rate
32 x 720 Mbps
Power Consumption
4.6 W
Package Type
355 mPGA
Color
RGB color, mono
1. The ADC is 11-bit, down-scaled to 10-bit. The PYTHON XK uses
a larger word-length internally to provide 10-bit on the output.
Table 2. ELECTRO−OPTICAL SPECIFICATIONS
Parameter
Specification
Active Pixels
25K: 5120 (H) x 5120 (V)
16K: 4096 (H) x 4096 (V)
12K: 4096 (H) x 3072 (V)
10K: 3840 (H) x 2896 (V)
Pixel Size
Conversion Gain
Temporal Noise
4.5 mm x 4.5 mm
0.085 LSB10/e^- , 130 mV/e^-
< 14 e^- (Non−Zero ROT, 1x gain)
Responsivity at 550 nm 5.8 V/lux.s
Parasitic Light
Sensitivity (PLS)
< 1/5000
Full Well Charge
> 12000 e^-
Quantum Efficiency
(QE) x FF
50% at 550 nm
Pixel FPN ^{(Note 2)}
PRNU ^{(Note 2)}
< 0.9 LSB10
< 1%
MTF
PSNL @ 20°C
(t_int = 30 ms)
Dark signal @ 20°C
68% @ 535 nm − X−dir & Y−dir
68% @ 535 nm − X−dir & Y−dir
(NIR)
91 LSB10/s, 1100 e^-/s
3.9 e^-/s, 0.33 LSB10/s
Dynamic range
59 dB
Signal-to-Noise
Ratio (SNR max)
41 dB
2. Only includes high−frequency component
www.onsemi.com
3