CS1W-OD232 Datasheet, PDF (54/70 Pages) Omron Electronics LLC – Multi-application Controllers: From High-performance Machine C ontrol to Highly Reliable Process Control

● H-PCF Optical Fiber Cables with Connectors (Black Composite Cables with Two-Optical Lines and Two Power Supply
Lines)
Applicable
Appearance
Model
Standards
S3200-CN@@@-20-20
Controller Link
SYSMAC LINK
S3200-CN@@@-20-25
---
S3200-CN@@@-25-25
Note: Optical connectors for H-PCF Optical Cables with Connectors are adhesive polished.
• Cable Length
The following cable lengths are available: 2 m, 5 m, 15 m, and
20 m. For lengths of 21 m or more, contact your OMRON sales
representative.
• Model Numbers
(1) 2 m, 5 m, 10 m, 15 m, 20 m
(e.g.) S3200-CN@@@-20-25
(1)
(2)
(3)
(2) 21 m or longer
(e.g.) S3200-CN-20-20
(1)
(3) Specify the
cable length
in meters
(1 ) H-PCF
Optical Fiber Cable
( 2) Cable length
@@@
201
501
102
152
202
Length
2m
5m
10m
15m
20m
(3) Connectors (both ends)
No. Connector lock
20
Full-lock
25
Half-lock
• Optical Connector Assembly Tool
Product
name
Applicable Units
This tool is used on site
for mounting crimp-cut
connectors and hard
Optical plastic-clad silica optical
Fiber
fiber for optical
Assembly transmission systems of
Tool * SYSMAC C-series
SYSBUS, SYSMAC
LINK, and Controller
Link.
Model
CAK-0057
Maker Standards
Sumitomo
Electric
Industries,
---
Ltd.
* There is a risk of quality problems when using cables assembled by typical
users, so we recommend purchasing cables with pre-attached connectors
or having a qualified technician assemble the cables.
Cable length
● GI Optical Cables
A qualified technician must select, assemble, and install GI
Optical Fiber Cable, so always let an optical cable specialist
handle the GI cable.
Usable Optical Fiber Cables and Optical Connectors
• Optical fiber types: Graded, indexed, multi-mode, all quartz
glass, fiber (GI-type AGF cable)
• Optical fiber construction (core diameter/clad diameter):
62.5/125 µm or 50/125 µm
• Optical fiber optical characteristics of optical fiber: Refer to the
tables.
• Optical connectors: ST connectors (IEC-874-10)
• 50/125 µm AGF Cables
Items
Minimum Typical Maximum
Remarks
Numerical
Aperture (N.A)
---
0.21
---
---
Transmission
loss (dB)
---
3.0Lf
0.5 km ≤ Lf
---
3.0 Lf + 0.2 0.2 km ≤ Lf ≤ 0.5 km
λ = 0.8 µm,
Ta = 25°C
3.0 Lf + 0.4 Lf ≤ 0.2 km
Connection
loss (dB)
---
--- 1.0
λ = 0.8 µm, one location
Transmission
band width
500
---
(MHz·km)
---
λ = 0.85 µm (LD)
Lf is Fiber length in km, Ta is ambient temperature, and λ is the peak
wavelength of the test light source.
• 62.5/125 µm AGF Cables
Items
Minimum Typical Maximum
Remarks
Numerical
Aperture (N.A)
---
0.28
---
---
Transmission
loss (dB)
---
3.5Lf
0.5 km ≤ Lf
---
3.5Lf + 0.2
0.2 km ≤ Lf ≤ 0.5 km
λ = 0.8 µm,
Ta = 25°C
3.5Lf + 0.4 Lf ≤ 0.2 km
Connection
loss (dB)
---
--- 1.0
λ = 0.8 µm, one location
Transmission
band width
200
---
(MHz·km)
---
λ = 0.85 µm (LD)
Lf is Fiber length in km, Ta is ambient temperature, and λ is the peak
wavelength of the test light source.
42
Programmable Controllers SYSMAC CS1G/H