CS1W-OD232 Datasheet, PDF (35/70 Pages) Omron Electronics LLC – Multi-application Controllers: From High-performance Machine C ontrol to Highly Reliable Process Control

■ Connecting Cables for CX-One Components (e.g. CX-Programmer)
Product name
Cables
between
Programming
Device
(computer)
and
peripheral
port
Applicable
computers
Specifications
Connection configuration
IBM PC/AT or compatible computer + CS1W-CN226/626 +
Peripheral port of CPU Unit
Peripheral port
RS-232C
IBM PC/AT or
compatible
computer
(D-Sub 9-pin)
Computer
(9-pin RS-232C)
Peripheral Port
Connecting Cable
CS1W-CN226/626
The following configuration can be used when using an
RS-232C cable to connect to an IBM PC/AT or compatible
computer.
IBM PC/AT or compatible computer + XW2Z-200S-CV/V or
XW2Z-500S-CV/V + Peripheral port of CPU Unit.
Peripheral port
RS-232C Cable
XW2Z-200S-CV/V
XW2Z-500S-CV/V
CS1W-CN118
Cable
length
Remarks
Model
Standards
2m
CS1W-CN226
Can be used
for both
peripheral bus
6 m ^{and host link.} CS1W-CN626
Use when
connecting to
CE
the peripheral
port with a
0.1 m
XW2Z-200S-
CV/V or
CS1W-CN118
XW2Z-500S-
CV/V
RS-232C
Cable.
IBM PC/AT or compatible computer + XW2Z-200S-CV/V or
XW2Z-500S-CV/V + RS-232C port of CPU Unit or Serial
Communications Board/Unit
Can be used
2 m for both
XW2Z-200S-CV
Serial Communications Board's
RS-232C ports
peripheral bus
and host link,
and is
equipped with
Connecting Cables
RS-232C Cable
XW2Z-200S-CV/V (2 m)
5 m ^{an anti-static XW2Z-500S-CV}
between Programming
Device (computer) and
RS-232C port
IBM PC/AT or
compatible
computer
Computer
XW2Z-500S-CV/V (5 m)
(9-pin RS-232C)
CPU Unit's built-in
RS-232C port
Note: We recommend the following configuration if the
CX-Programmer is always connected and you want to
connector.
---
(D-Sub 9-pin)
avoid switching to the other CPU Unit when an error
occurs.
2 m Can be used XW2Z-200S-V
Terminator ON
+5 V must be supplied to the
NT-AL001 at computer side.
+5V
Active CPU Unit
Standby CPU Unit
RUN
ERR/ALM
INH BKUP
PRPHL COMM
DPL01
DPL STATUS
L
ACTIVE
CPU STATUS
R
ACTIVE
CPU STATUS
SYSMAC
CS1D-CPU67H
PROGRAMMABLE CONTROLLER
LEFT CPU
USE
NO USE
MCPWR
OPEN
BUSY
PERIPHERAL
RIGHT CPU
USE
NO USE
DPL SW
ON OFF
SPL DPL
ACT. ACT.
LEFT RIGHT
ON
INIT.
SW
PRPHL
COMM
A39512
RSV
PORT
ON
DUPLEX
RUN
ERR/ALM
INH BKUP
PRPHL COMM
SYSMAC
CS1D-CPU67H
PROGRAMMABLE CONTROLLER
MCPWR
OPEN
BUSY
PERIPHERAL
PORT
for host link
only. Cannot
be used for
peripheral
NT-AL001
RS-232C
RS-422A/485
CX-Programmer
RS-422A Adapter
CJ1W-CIF11
RS-422A/485 _{or NT-AL001}
5m
bus.
XW2Z-500S-V
IBM PC/AT or compatible computer +
CS1W-CIF31 + CS1W-CN226/626 + Peripheral
port of CPU Unit
USB-Serial Conversion Cable
CS1W-CIF31
Can be used
for both
peripheral bus
Computer
USB port
Serial Connecting Cable
CS1W-CN226/626
XW2Z-200S-CV/500S-CV
XW2Z-200S-V/500S-V
CQM1-CIF02
Peripheral port or
RS-232C port
The USB
Serial
and host link.
IBM PC/AT or compatible computer +
USB-Serial Conversion
CS1W-CIF31 + XW2Z-200S-CV/500S-CV +
Cable (PC driver CD-ROM
CS1W-CN118 + Peripheral port of CPU Unit
included)
IBM PC/AT or
compatible
Conforms to USB 1.1
Specifications.
computer
(D-Sub 9-pin)
IBM PC/AT or compatible computer +
CS1W-CIF31 + XW2Z-200S-V/500S-V +
CS1W-CN118 + Peripheral port of CPU Unit
Conversion
Cable
connects to
the serial
connecting
cable,
0.5 m
which
connects to
the PLC’s
peripheral
port or
Can be used
for both
peripheral bus
and host link.
Can be used
for host link
only. Cannot
be used for
peripheral
bus.
CS1W-CIF31
N
IBM PC/AT or compatible computer +
RS-232C
Can be used
CS1W-CIF31 + XW2Z-200S-CV/500S-CV +
port.
for both
CS1W-CN118 + RS-232C port of CPU Unit or
peripheral bus
Serial Communications Board/Unit
and host link.
IBM PC/AT or compatible computer +
CS1W-CIF31 + XW2Z-200S-V/500S-V + RS-232C
port of CPU Unit or Serial Communications Board/
Unit
Can be used
for host link
only. Cannot
be used for
peripheral
bus.
Programmable Controllers SYSMAC CS1G/H
23