CS1W-OD232 Datasheet, PDF (34/70 Pages) Omron Electronics LLC – Multi-application Controllers: From High-performance Machine C ontrol to Highly Reliable Process Control

Programming Devices
■ Support Software
Product name
Specifications
Number of Model
Standards licenses
Media
Model
1 license
FA Integrated Tool
Package
CX-One Ver.4.@
The CX-One is a comprehensive software package that
integrates Support Software for OMRON PLCs and
components.
CX-One runs on the following OS.
Windows 2000 (Service Pack 4 or higher), XP, Vista, or 7
Note: Except for 64-bit version.
3 licenses
10 licenses
CX-One Version 4.@ includes CX-Programmer Ver.9.@ and
CX-Simulator Ver. 1.@.
30 licenses
For details, refer to the CX-One catalog (Cat. No. R134).
50 licenses
CD
DVD
CD
DVD
CD
DVD
CD
DVD
CD
DVD
CXONE-AL01C-V4
CXONE-AL01D-V4
CXONE-AL03C-V4
CXONE-AL03D-V4
CXONE-AL10C-V4
CXONE-AL10D-V4
CXONE-AL30C-V4
CXONE-AL30D-V4
CXONE-AL50C-V4
CXONE-AL50D-V4
Note 1: Site licenses are available for users who will run CX-One on multiple computers. Ask your OMRON sales representative for details.
2: Before ordering the software on a DVD, be sure that your computer and drive are compatible with the DVD format.
Standards
---
● Support Software in CX-One Ver.4.@
The following tables lists the Support Software that can be installed from CX-One.
Support Software in CX-One
CX-Programmer
Ver.9.@
CX-Integrator
Ver.2.@
Switch Box Utility Ver.1.@
CX-Protocol
Ver.1.@
CX-Simulator
CX-Position
CX-Motion-NCF
Ver.1.@
Ver.2.@
Ver.1.@
CX-Motion-MCH
Ver.2.@
CX-Motion
Ver.2.@
CX-Drive
Ver.1.@
CX-Process Tool Ver.5.@
Faceplate
Auto-Builder for NS
CX-Designer
NV-Designer
CX-Configurator
FDT
CX-Thermo
CX-FLnet
Network
Configrator
Ver.3.@
Ver.3.@
Ver.1.@
Ver.1.@
Ver.4.@
Ver.1.@
Ver.3.@
CX-Server
Ver.4.@
PLC Tools
(Installed automatically.)
Outline
Application software to create and debug programs for SYSMAC CS/CJ/CP/NSJ-series, C-series, and CVM1/C-series CPU
Units, and to create and monitor data for SYSMAC CS/CJ-series Position Control Units.
Application software to build and set up FA networks, such as Controller Link, DeviceNet, CompoNet, CompoWay/F, and Ethernet
networks. The Routing Table Component and Data Link Component can be started from here. DeviceNet Configuration
functionality is also included.
Utility software that helps you to debug PLCs. It helps you to monitor the I/O status and to monitor/change present values within
the PLC you specify.
Application software to create protocols (communications sequences) between SYSMAC CS/CJ/CP/NSJ-series or C200HX/HG/
HE Serial Communications Boards/Units and general-purpose external devices.
Application software to simulate SYSMAC CS/CJ/CP/NSJ-series CPU Unit operation on the computer to debug PLC programs
without a CPU Unit.
Application software to create and monitor data for SYSMAC CS/CJ-series Position Control Units. (except for High-speed type)
Application software to creat and monitor data for SYSMAC CS/CJ-series Position Control Units with MECHATROLINK-II *
interface (NC@71).
Application software to create data, and monitor program, and monitor data for SYSMAC CS/CJ-series Motion Control Units with
MECHATROLINK-II * interface (MCH71).
Application software to create data for SYSMAC CS/CJ-series, C200HX/HG/HE, and CVM1/CV-series Motion Control Units, and
to create and monitor motion control programs.
Application software to set and control data for Inverters and Servos.
Application software to create and debug function block programs for SYSMAC CS/CJ-series Loop Controllers (Loop Control
Units/Boards, Process Control CPU Units, and Loop Control CPU Units).
Application software that automatically outputs screen data as project files for NS-series PTs from tag information in function
block programs created with the CX-Process Tool.
Application software to create screen data for NS-series PTs.
Applications software to create screen data for NV-series small PTs.
Applications software to setting various units by installing its DTM module.
Application software to set and control parameters in components such as Temperature Control Units.
Application software for system setting and monitoring of SYSMAC CS/CJ-series FL-net Units.
Application software for setting the tag datalink at the built-in EtherNet/IP port.
Middleware necessary for CX-One applications to communicate with OMRON components, such, such as PLCs, Display
Devices, and Temperature Control Units.
A group of components used with CX-One applications, such as the CX-Programmer and CX-Integrator. Includes the following:
I/O tables, PLC memory, PLC Setup, Data Tracing/Time Chart Monitoring, PLC Error Logs, File Memory, PLC clock, Routing
Tables, and Data Link Tables.
* MECHATROLINK II is a registered trademark of the MECHATROLINK Members Association.
Note: If the complete CX-One package is installed, approximately 2.8 GB of Hard disk space will be required.
22
Programmable Controllers SYSMAC CS1G/H