CS1W-OD232 Datasheet, PDF (36/70 Pages) Omron Electronics LLC – Multi-application Controllers: From High-performance Machine C ontrol to Highly Reliable Process Control

Note: Either of the serial communications modes listed in the following table can be used to connect CX-One Support Software (e.g., the CX-Programmer) to a
CS1-series PLC.
Serial communications mode
Features
Peripheral bus
This mode can provide high-speed communications, so this mode is normally used to connect when using CX-One component
software such as the CX-Programmer.
• Supports 1:1 connections only.
• The Programming Device’s baud rate
Host Link (SYSWAY)
This is a general host computer communications protocol, which supports 1:1 and 1:N connections.
• Host link operates at a slower speed than peripheral bus.
• Host link supports 1:N connections as well as long-distance connections when RS-422A/RS-485 is used for a connection
through a modem or optical adapter.
■ Programming Console
Product name
Specifications
Cable model
(Separate item)
Connection configuration
Model
Programming Console
Can be connected
to the CPU Unit’s
peripheral port
only. Cannot be
connected to the
RS-232C port.
A CS1W-KS001-E
CS1W-CN224: 2 m
CS1W-CN624: 6 m
Programming
Console Key
Sheet is required
(sold separately).
CS1W-CN224 (2 m)
CS1W-CN624 (6 m)
Peripheral port
Programming
Console
Key Sheet
CS1W-KS001
Programming
Console
C200H-PRO27
C200H-PRO27-E
Programming Console Key
Sheet
For the following Programming Consoles: C200H-PRO27
CS1W-KS001-E
Programming
Console
Connecting
Cable
For C200H-PRO27 connection, Cable length: 2 m
For C200H-PRO27 connection, Cable length: 6 m
CS1W-CN224
CS1W-CN624
Standards
U, C, N, CE
CE
■ Connecting Cables for NS-series PTs
Product name
Connecting Cables for
NS-series PTs
Specifications
Connection configuration
Cable length
Model
Connecting Cables between an NS-series PT and the RS-232C port of CPU Unit
or Serial Communications Board/Unit
NS-series PT
RS-232C
Serial
Communications
Board's
2m
XW2Z-200T
RS-232C Cable
XW2Z-200T (2 m)
XW2Z-500T (5 m)
CPU Unit's built-in
RS-232C port
5m
XW2Z-500T
2m
XW2Z-200T-2
Connecting Cables between an NS-series PT and the peripheral port of CPU Unit
5m
XW2Z-500T-2
Standards
---
24
Programmable Controllers SYSMAC CS1G/H