74HCT9046A Datasheet, PDF (18/43 Pages) NXP Semiconductors – PLL with bandgap controlled VCO

NXP Semiconductors
74HCT9046A
PLL with band gap controlled VCO
Table 5. Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
V_OH
HIGH-level output voltage
V_OL
LOW-level output voltage
I_I
input leakage current
I_OZ
OFF-state output current
VCO section
pins PCP_OUT and PCn_OUT;
V_CC = 4.5 V; V_I = V_IH or V_IL
I_O = −20 µA
I_O = −4.0 mA
pins PCP_OUT and PCn_OUT;
V_CC = 4.5 V; V_I = V_IH or V_IL
I_O = 20 µA
I_O = 4.0 mA
pins SIG_IN and COMP_IN;
V_CC = 5.5 V; V_I = V_CC or GND
pin PC2_OUT; V_CC = 5.5 V;
V_I = V_IH or V_IL; V_O = V_CC or GND
V_IH
HIGH-level input voltage
pin INH; V_CC = 4.5 V to 5.5 V;
DC coupled
V_IL
LOW-level input voltage
pin INH; V_CC = 4.5 V to 5.5 V;
DC coupled
V_OH
HIGH-level output voltage
V_OL
LOW-level output voltage
I_I
General
input leakage current
pin VCO_OUT; V_CC = 4.5 V;
V_I = V_IH or V_IL
I_O = −20 µA
I_O = −4.0 mA
pin VCO_OUT; V_CC = 4.5 V;
V_I = V_IH or V_IL
I_O = 20 µA
I_O = 4.0 mA
pins C1A and C1B; V_CC = 4.5 V;
V_I = V_IH or V_IL; I_O = 4.0 mA
pins INH and VCO_IN;
V_CC = 5.5 V; V_CC or GND
I_CC
∆I_CC
supply current
additional supply current
disabled; V_CC = 5.5 V;
pin INH at V_CC
per input pin; V_I = V_CC − 2.1 V;
V_CC = 4.5 V; other inputs at V_CC or
GND;
Min Typ Max Unit
4.4 -
-
V
3.7 -
-
V
-
-
0.1 V
-
-
0.4 V
-
-
±45 µA
-
-
±10.0 µA
2.0 -
-
-
-
V
0.8 V
4.4 -
-
V
3.7 -
-
V
-
-
0.1 V
-
-
0.4 V
-
-
0.54 V
-
-
±1.0 µA
-
-
160.0 µA
-
-
490 µA
74HCT9046A_6
Product data sheet
Rev. 06 — 15 September 2009
© NXP B.V. 2009. All rights reserved.
18 of 43