|
74HCT9046A Datasheet, PDF (14/43 Pages) NXP Semiconductors – PLL with bandgap controlled VCO | |||
|
◁ |
NXP Semiconductors
74HCT9046A
PLL with band gap controlled VCO
A
Icp
17
Rbias
Icp
F(jÏ)
R4
INPUT
C2
OUTPUT
001aak446
m
1 / AÏ1
1 /AÏ2
Ï
001aak447
a. Simple loop ï¬lter for PC2 with
damping
b. Amplitude characteristic
Ï1 = -R---1b---7i--a--s à C2 = R3â à C2
Ï2 = R4 Ã C2
F(jÏ) = -1---1-â---A-+----+--j--Ï--j--ÏÏ---2-Ï---1-
Fig 13. Simple loop ï¬lter for PC2 with damping
O
â1/Ï2
1 /AÏ1
001aak448
c. Pole zero diagram
A = DC gain limit, due to leakage
9. Limiting values
Table 3. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min Max Unit
VCC
supply voltage
IIK
input clamping current
VI < â0.5 V or VI > VCC + 0.5 V
IOK
output clamping current
VO < â0.5 V or VO > VCC + 0.5 V
IO
output current
â0.5 V < VO < VCC + 0.5 V
â0.5 +7
V
-
±20
mA
-
±20
mA
-
±25
mA
ICC
IGND
Tstg
Ptot
supply current
ground current
storage temperature
total power dissipation
DIP16
Tamb = â40 °C to +125 °C
-
+50 mA
â50 -
mA
â65 +150 °C
[1] -
750 mW
SO16 and TSSOP16
[2] -
500 mW
[1] For DIP16 packages: above 70 °C the value of Ptot derates linearly with 12 mW/K.
[2] For SO16 and TSSOP16 packages: above 70 °C the value of Ptot derates linearly with 8 mW/K.
74HCT9046A_6
Product data sheet
Rev. 06 â 15 September 2009
© NXP B.V. 2009. All rights reserved.
14 of 43
|
▷ |