DS90C3201_06 Datasheet, PDF (4/20 Pages) National Semiconductor (TI) – 3.3V 8 MHz to 135MHz Dual FPD-LIink Transmitter

Electrical Characteristics (Continued)
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Units
TRANSMITTER SUPPLY CURRENT
ICCTW
Transmitter Supply Current
Worst Case
(Figures 2, 4)
R_L = 100Ω
C_L = 5pF,
Worst Case Pattern
Default Register
Settings
f = 8 MHz
f = 135 MHz
20
60
95
mA
65
150
235
mA
ICCTG
Transmitter Supply Current
Incremental Test Pattern
(Figures 3, 4)
R_L = 100Ω
C_L = 5pF,
Worst Case Pattern
Default Register
Settings
f = 8 MHz
f = 135 MHz
15
55
90
mA
40
110
175
mA
ICCTZ
Transmitter Supply Current
Power Down
PDWNB = Low
R_L = 100Ω, C_L = 5pF,
Default Register Settings
2
mA
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the device
should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
Note 2: Typical values are given for V_DD = 3.3V and T _A = +25˚C.
Note 3: Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground unless otherwise
specified.
Recommended Transmitter Input Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Min
T_CIT
T_CIP
T_CIH
T_CIH
T_XIT
TJIT_RMS
TCLK IN Transition Time (Figure 6)
TCLK IN Period (Figure 7)
TCLK IN High Time (Figure 7)
TCLK IN High Time (Figure 7)
TCLK IN Transition Time
TCLK IN Jitter (RMS)
7.4
0.30T_CIT
0.30T_CIT
(Note 4)
Note 4: Less than 5ns of 30% of TCIP, which ever is less.
Typ
0.50T_CIT
0.50T_CIT
±200
Max
(Note 4)
125.0
0.70T_CIT
0.70T_CIT
(Note 4)
Units
ns
ns
ns
ns
ns
ps
www.national.com
4