DS16EV5110_0706 Datasheet, PDF (4/18 Pages) National Semiconductor (TI) – Video Equalizer for DVI, HDMI, and Cat5 Cables

Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage (V_DD)
CMOS Input Voltage
CMOS Output Voltage
CML Input/Output Voltage
Junction Temperature
Storage Temperature
Lead Temp. (Soldering, 5 sec.)
−0.5V to +4.0V
−0.5V + 4.0V
−0.5V to 4.0V
-0.5V to 4.0V
+150°C
−65°C to +150°C
+260°C
ESD Rating
HBM, 1.5 kΩ, 100 pF
CML Inputs
Thermal Resistance
 θ_JA, No Airflow
>8 kV
>10 kV
30°C/W
Recommended Operating
Conditions (Notes 2, 3)
Supply Voltage
(V_DD to GND)
Ambient Temperature
Min Typ
3.0 3.3
−40 25
Max Units
3.6 V
+85 °C
Electrical Characteristics
Over recommended operating supply and temperature ranges unless other specified. (Notes 2, 3)
Symbol
Parameter
Conditions
Min
Typ
LVCMOS DC SPECIFICATIONS
I_IH-PU
High Level Input Leakage Current CMOS pins with internal pull-up
resistors
—10
I_IH-PD
High Level Input Leakage Current CMOS pins with internal pull-down
80
resistors
I_IL-PU
Low Level Input Leakage Current CMOS pins with internal pull-up
resistors
—20
I_IL-PD
Low Level Input Leakage Current CMOS pins with internal pull-down
resistors
—10
V_IH
High Level Input Voltage
2.0
V_IL
Low Level Input Voltage
0
V_OH
High Level Output Voltage
SD Pin
2.4
V_OL
Low Level Output Voltage
SD Pin
POWER
P
Power Supply Consumption
EN = High, Device Enabled
475
EN = Low, Power Down Mode
N
Supply Noise Tolerance (Note 4) 50 Hz – 100 Hz
100
100 Hz – 10 MHz
40
10 MHz – 825 MHz
10
CML INPUTS
V_IN
Input Voltage Swing
Measured differentially at TPA
(Figure 1)
800
V_ICMDC
Input Common-Mode Voltage
DC-Coupled Requirement
Measured at TPB (Figure 1)
V_DD-0.3
R_LI
Differential Input Return Loss
100 MHz– 825 MHz, with fixture's
effect de-embedded
10
R_IN
Input Resistance
CML OUTPUTS
IN+ to VDD and IN− to VDD
45
50
V_O
Output Voltage Swing
Measured differentially with OUT+
and OUT− terminated by 50Ω to
800
VDD
V_OCM
t_R, t_F
Output common-mode Voltage
Transition Time
Measured Single-ended
20% to 80% of differential output
voltage, measured within 1" from
output pins.
V_DD-0.3
75
t_CCSK
Inter Pair Channel-to-Channel Difference in 50% crossing
Skew (all 4 Channels)
between shortest and longest
25
channels
Max
Units
+10
105
—10
+10
VDD
0.8
0.4
700
70
μA
μA
μA
μA
V
V
V
V
mW
mW
mV_P-P
mV_P-P
mV_P-P
1200
V_DD-0.2
55
mV_P-P
V
dB
Ω
1200
V_DD-0.2
240
mV_P-P
V
ps
ps
www.national.com
4