UPD78361A Datasheet, PDF (68/88 Pages) NEC – 16/8-BIT SINGLE-CHIP MICROCONTROLLER

µPD78361A, 78362A
DC Characteristics (TA = –40 to +85 ˚C, VDD = +5 V ± 10 %, VSS = 0 V)
Parameter
Symbol
Low-level input voltage
VIL1
VIL2
High-level input voltage VIH1
VIH2
Low-level output voltage VOL1
VOL2
VOL3
High-level output voltage VOH
Input leakage current
ILI
Output leakage current
ILO
VDD supply current
IDD1
IDD2
Data retention voltage
VDDDR
Data retention current
IDDDR
Pull-up resistance
RL
Test conditions
Note 1
Note 2
Note 1
Note 2
Note 3
IOL = 2.0 mA
Note 4
IOL = 15 mA
Note 5
IOL = 10 mA
IOH = –400 µA
0 V ≤ VI ≤ VDD, AVDD = VDD
0 V ≤ VO ≤ VDD, AVDD = VDD
Operating mode
HALT mode
STOP mode
STOP mode VDDDR = 2.5 V
VDDDR = 5.0 V ± 10 %
VI = 0 V
MIN. TYP. MAX. Unit
0
0.8
V
0
0.2VDD
V
2.2
V
0.8VDD
V
0.45
V
1.5
V
1.5
V
VDD – 1.0
V
±10
µA
±10
µA
70
120
mA
45
70
mA
2.5
V
2
10
µA
10
50
µA
15
60
150
KΩ
Notes 1. Pins other than those specified in Note 2.
2. RESET, X1, X2, P20/NMI, P21/INTP0, P22/INTP1, P23/INTP2, P24/INTP3/TI, P25/INTP4, P32/
SO/SB0, P33/SI/SB1 and P34/SCK pins.
3. Pins other than those specified in Notes 4 and 5.
4. P80/TO00-P85/TO05 pins (When IOL = 15 mA is in operation, up to three pins can be ON
simultaneously.)
5. P00/RTP0-P03/RTP3, P04/PWM0, P05/TCUD/PWM1, P06/TIUD/TO40 and P07/TCLRUD pins
(When IOL = 10 mA is in operation, up to four pins can be ON simultaneously.) .
Caution When the P80-P85, and P00-P07 pins are not used under the conditions specified in Notes
4 and 5, they have the same characteristics as in Note 3.
68