|
UPD78361A Datasheet, PDF (66/88 Pages) NEC – 16/8-BIT SINGLE-CHIP MICROCONTROLLER | |||
|
◁ |
µPD78361A, 78362A
9. ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (TA = 25 ËC)
Parameter
Symbol
Test conditions
Rating
Unit
Power supply voltage
VDD
â0.5 to +7.0
V
AVDD
â0.5 to VDD + 0.5
V
AVSS
â0.5 to +0.5
V
Input voltage
VI
Pins other than
P70/ANI0-P77/ANI7
â0.5 to VDD + 0.5
V
Output voltage
VO
â0.5 to VDD + 0.5
V
Low-level output current
IOL
Note
20
mA
Output pins other than
those in the note
4.0
mA
Total of all output pins
200
mA
High-level output current
IOH
All output pins
â3.0
mA
Total of all output pins
â25
mA
Analog input voltage
VIAN
P70/ANI0-P77/ANI7 pins AVSS â 0.5 to AVDD + 0.5
V
A/D converter reference input voltage AVREF
AVSS â 0.5 to AVDD + 0.5
V
Operating ambient temperature
TA
â40 to +85
ËC
Storage temperature
Tstg
â60 to +150
ËC
Note P00/RTP0-P03/RTP3, P04/PWM0, P05/TCUD/PWM1, P06/TIUD/TO40, P07/TCLRUD, and P80/TO00-
P85/TO05 pins.
Caution Product quality may suffer if the absolute rating is exceeded for any parameter, even momentarily.
In other words, an absolute maxumum rating is a value at which the possibility of psysical
damage to the product cannnot be ruled out. Care must therefore be taken to ensure that the
these ratings are not exceeded during use of the product.
Recommended Operating Conditions
Oscillation frequency
3 MHz ⤠fXX ⤠8 MHz
TA
â40 to +85 ËC
VDD
+5.0 V ± 10 %
Capacitance (TA = 25 ËC, VSS = VDD = 0 V)
Parameter
Input capacitance
Output capacitance
I/O capacitance
Symbol
CI
CO
CIO
Test conditions
f = 1 MHz
0 V except measured pins
MIN. TYP. MAX. Unit
20
pF
20
pF
20
pF
66
|
▷ |