UPD784907 Datasheet, PDF (58/98 Pages) NEC – 16-BIT SINGLE-CHIP MICROCONTROLLER

µPD784907, 784908
(3) Real-time output port
INTC10 and INTC11 function as the output triggers for the real-time output ports. For these triggers, the macro
service can simultaneously set the next output pattern and interval. Therefore, INTC10 and INTC11 can be used
to independently control two stepping motors. They can also be applied to PWM and DC motor control.
Output pattern profile (memory)
Pn
Pn–1
Output timing profile (memory)
Tn
Tn–1
P2
T2
P1
T1
Internal bus
Internal bus
(SFR)
P00 to P03
P0L
Output latch
Match
INTC10
CR10
TM1
(SFR)
Each time macro service request (INTC10) is generated, a pattern and timing data are transferred to the buffer
register (P0L) and compare register (CR10), respectively. When the contents of timer register 1 (TM1) and CR10
match, another INTC10 is generated, and the P0L contents are transferred to the output latch. When Tn (last
byte) is transferred to CR10, vectored interrupt request (INTC10) is generated.
For INTC11, the same operation as that performed for INTC10 is performed.
58
Data Sheet U11680EJ2V0DS00