UPD784218 Datasheet, PDF (47/92 Pages) NEC – 16-/8-BIT SINGLE-CHIP MICROCONTROLLERS

µPD784218, 784218Y
Table 9-2. Interrupt Sources (2/2)
Type
Maskable
Default
Priority
10
11
12
13
14
15
16
Name
INTSR1
INTCSI1
INTST1
INTSER2
INTSR2
INTCSI2
INTST2
INTTM3
INTTM00
17
INTTM01
18
INTTM1
19
INTTM2
20
INTAD
21
INTTM5
22
INTTM6
23
INTTM7
24
INTTM8
25
INTWT
26 (lowest) INTKR
Source
Trigger
End of UART reception by ASI1
End of 3-wire transfer by CSI1
End of UART transmission by ASI1
Occurrence of UART reception error in ASI2
End of UART reception by ASI2
End of 3-wire transfer by CSI2
End of UART transmission by ASI2
Reference time interval signal from watch timer
Signal indicating coincidence between 16-bit
timer counter and capture/compare register
(CR00)
Signal indicating coincidence between 16-bit
timer counter and capture/compare register
(CR01)
Occurrence of coincidence signal of 8-bit
timer/event counter 1
Occurrence of coincidence signal of 8-bit
timer/event counter 2
End of conversion by A/D converter
Occurrence of coincidence signal of 8-bit
timer/event counter 5
Occurrence of coincidence signal of 8-bit
timer/event counter 6
Occurrence of coincidence signal of 8-bit
timer/event counter 7
Occurrence of coincidence signal of 8-bit
timer/event counter 8
Overflow of watch timer
Detection of falling edge of port 8
Internal/
External
Internal
External
Macro
Service
√
Remarks 1. ASI: Asynchronous Serial Interface
CSI: Clocked Serial Interface
2. Two watchdog timer interrupt sources, non-maskable interrupt (INTWDT) and maskable interrupt
(INTWDTM), are available and only one of those can be selected.
Data Sheet U12304EJ2V0DS00
47