|
DRQ-12-50-L48 Datasheet, PDF (1/26 Pages) Murata Power Solutions Inc. – 600W Digital Fully Regulated Intermediate DC-DC Bus Converter | |||
|
www.murata-ps.com
Typical unit
FEATURES
ï®ï Fixed DC outputs, 12V @ 50A
ï®ï Advanced Bus Converter industry standard
quarter-brick with digital PMBus⢠interface
ï®ï Optional ï¬ve pin version (DOSA compatible
pinouts)
ï®ï 44-60 VDC input range
ï®ï Load sharing option
ï®ï Baseplate & heatsink options
ï®ï 96% typical efï¬ciency
ï®ï 2250 VDC isolation
ï®ï Certiï¬ed to UL 60950-1, CSA-C22.2 No. 60950-1,
2nd edition safety approvals
ï®ï Extensive self-protection, OVP, input undervolt-
age, current limiting and thermal shutdown
DRQ-12/50-L48 Series
600W Digital Fully Regulated
Intermediate DC-DC Bus Converter
PRODUCT OVERVIEW
The DRQ 600W series provides a fully regulated,
digitally controlled DC output in a ¼-brick format
that will support the evolving Advanced Bus Con-
verter (ABC) industry standard footprint for isolated
board mounted power modules. The DRQ series
supports advances in power conversion technology
including a digital interface supporting the PMBus
protocol for communications to power modules.
The DRQ series offers high output current (up to
50 Amps) in an industry standard âquarter brickâ
package. The DRQ series is an isolated, regulated,
600W-12Vout quarter brick that has an input range
of 44-60Vdc with a typical efï¬ciency of 96%. The
DRQ-12/50-L48 is ideal for intermediate bus ap-
plications.
A digitally controlled version is also available
with the Advanced Bus Converter (ABC) pinout.
Advanced automated surface mount assembly
and planar magnetics deliver galvanic isolation
rated at 2250 Vdc for functional insulation. Target
markets include Networking Equipment, Power
over Ethernet applications, Wireless Network-
ing Equipment, Telecommunications Equipment,
Wireless pre-ampliï¬ers, Industrial and test equip-
ment, 12V Fan trays and applications requiring a
regulated 12V output.
A wealth of self-protection features include input
undervoltage lockout and overtemperature shut-
down; over current protection using the âhiccupâ
autorestart technique, provides indeï¬nite short-
circuit protection, along with output OVP. The DRQ
series is certiï¬ed to safety standards UL/IEC/CSA
60950-1, 2nd edition. It meets RFI/EMI conducted
emission compliance to EN55022, CISPR22 with an
external ï¬lter.
APPLICATIONS
ï®ï Embedded systems, datacom and telecom
installations, wireless base stations
ï®ï Disk farms, data centers and cellular repeater sites
ï®ï Remote sensor systems, dedicated controllers
ï®ï Instrumentation systems, R&D platforms, auto-
mated test ï¬xtures
ï®ï Data concentrators, voice forwarding and
speech processing systems
F1
+Vin (1)
External
DC
Power
Source
On/Off
Control
(2)
Open = On
logic)
-Vin (3)
Barrier
Controller
and Power
Reference and
Error Ampliï¬er
Figure 1. Connection Diagram (without digital interface)
Typical topology is shown. Murata Power Solutions recommends an external fuse.
+Vout (8)
-Vout (4)
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_DRQ-12/50-L48NK.B02 Page 1 of 26
|
▷ |