|
MC68HC11KA4TS Datasheet, PDF (60/68 Pages) Motorola, Inc – 8-Bit Microcontroller | |||
|
◁ |
TMSK2 âTimer Interrupt Mask 2
$0024
Bit 7
6
5
4
3
TOI
RTII
PAOVI
PAII
â
RESET:
0
0
0
0
0
2
1
Bit 0
â
PR1
PR0
0
0
0
TOI â Timer Overflow Interrupt Enable
Refer to 10 Main Timer.
RTII â Real-Time Interrupt Enable
Refer to 10 Main Timer.
PAOVI â Pulse Accumulator Overflow Interrupt Enable
0 = Pulse accumulator overflow interrupt disabled
1 = Pulse accumulator overflow interrupt enabled
PAII â Pulse Accumulator Input Interrupt Enable
0 = Pulse accumulator input interrupt disabled
1 = Pulse accumulator input interrupt enabled if PAIF bit in TFLG2 register is set
Bits [3:2] â Not implemented
Always read zero
PR[1:0] â Timer Prescaler Select
Refer to 10 Main Timer.
NOTE
Control bits [7:4] in TMSK2 correspond bit for bit with flag bits [7:4] in TFLG2. Ones
in TMSK2 enable the corresponding interrupt sources.
TFLG2 âTimer Interrupt Flag 2
Bit 7
6
5
4
3
2
TOF
RTIF PAOVF PAIF
â
â
RESET:
0
0
0
0
0
0
Clear flags by writing a one to the corresponding bit position(s).
TOF â Timer Overflow Enable
Refer to 10 Main Timer.
RTIF â Real-Time Interrupt Flag
Refer to 10 Main Timer.
PAOVF â Pulse Accumulator Overflow Flag
Set when PACNT changes from $FF to $00
PAIF â Pulse Accumulator Input Edge Flag
Set each time a selected active edge is detected on the PAI input line
Bits [3:0] â Not implemented
Always read zero
$0025
1
Bit 0
â
â
0
0
MOTOROLA
60
MC68HC11KA4
MC68HC11KA4TS/D
|
▷ |