MMC2080 Datasheet, PDF (28/34 Pages) Motorola, Inc – Integrated Processor with Roaming FLEX Decoder

General Characteristics
Part 3 Specifications
3.1 General Characteristics
The MMC2080/2075 specifications are preliminary, from design simulations, and may not be fully tested
or guaranteed at this early stage of the product life cycle. Finalized specifications will be published upon the
completion of full characterization and device qualifications.
3.2 Maximum Ratings
WARNING:
This device contains circuitry protecting against damage due to high static
voltage or electrical fields; however, normal precautions should be taken to
avoid exceeding maximum voltage ratings. Reliability is enhanced if
unused inputs are tied to an appropriate logic voltage level (for example,
either Vss or Vdd).
NOTE:
In the calculation of timing requirements, adding a maximum value of one
specification to a minimum value of another specification does not yield a
reasonable sum. A maximum specification is calculated using a worst-case
variation of process parameter values in one direction. The minimum
specification is calculated using the worst-case variation for the same
parameters in the opposite direction. Therefore, a “maximum” value for a
specification will never occur in the same device that has a “minimum”
value for another specification; adding a maximum to a minimum
represents a condition that can never exist.
Table 21. DC Absolute Maximum Operating Conditions
Characteristics
Symbol
Min
Typ
Max
Supply (All)
Vdd
1.8
3.0
3.6
Input Voltage Range
V_I
Input Clamp Current
I_I
(V₁<0 or V₁>QVDDH)
Output Clamp Current
I_O
(V₁<0 or V₁>QVDDH)
Storage Temperature Range
Units
V
V
mA
mA
o_C
Remaining specification information to be provided.
28
MMC2080/2075 Technical Data
Preliminary