|
MT46V64M8P-5BF Datasheet, PDF (1/93 Pages) Micron Technology – 512Mb: x4, x8, x16 Double Data Rate (DDR) SDRAM SDRAM Features | |||
|
512Mb: x4, x8, x16 DDR SDRAM
Features
Double Data Rate (DDR) SDRAM
MT46V128M4 â 32 Meg x 4 x 4 banks
MT46V64M8 â 16 Meg x 8 x 4 banks
MT46V32M16 â 8 Meg x 16 x 4 banks
Features
⢠VDD = 2.5V ±0.2V, VDDQ = 2.5V ±0.2V
VDD = 2.6V ±0.1V, VDDQ = 2.6V ±0.1V (DDR400)1
⢠Bidirectional data strobe (DQS) transmitted/
received with data, i.e., source-synchronous data
capture (x16 has two â one per byte)
⢠Internal, pipelined double-data-rate (DDR)
architecture; two data accesses per clock cycle
⢠Differential clock inputs (CK and CK#)
⢠Commands entered on each positive CK edge
⢠DQS edge-aligned with data for READs; center-
aligned with data for WRITEs
⢠DLL to align DQ and DQS transitions with CK
⢠Four internal banks for concurrent operation
⢠Data mask (DM) for masking write data
(x16 has two â one per byte)
⢠Programmable burst lengths: 2, 4, or 8
⢠Auto refresh
â 64ms, 8192-cycle
⢠Longer-lead TSOP for improved reliability (OCPL)
⢠2.5V I/O (SSTL_2 compatible)
⢠Concurrent auto precharge option is supported
⢠tRAS lockout supported (tRAP = tRCD)
Options
Marking
⢠Configuration
â 128 Meg x 4 (32 Meg x 4 x 4 banks)
128M4
â 64 Meg x 8 (16 Meg x 8 x 4 banks)
64M8
â 32 Meg x 16 (8 Meg x 16 x 4 banks)
32M16
⢠Plastic package
â 66-pin TSOP
TG
â 66-pin TSOP (Pb-free)
P
â 60-ball FBGA (10mm x 12.5mm)
FN2
â 60-ball FBGA (10mm x 12.5mm) (Pb-free) BN2
â 60-ball FBGA (8mm x 12.5mm)
CV3
â 60-ball FBGA (8mm x 12.5mm) (Pb-free)
CY3
⢠Timing â cycle time
â 5ns @ CL = 3 (DDR400)
-5B
â 6ns @ CL = 2.5 (DDR333) (FBGA only)
-62
â 6ns @ CL = 2.5 (DDR333) (TSOP only)
-6T2
⢠Self refresh
â Standard
None
â Low-power self refresh
L
⢠Temperature rating
â Commercial (0°C to +70°C)
None
â Industrial (â40°C to +85°C)
IT
⢠Revision
â x4, x8, x16
:F
â x4, x8, x16
:J
Notes: 1. DDR400 devices operating at < DDR333
conditions can use VDD/VDDQ = 2.5V +0.2V.
2. Available only on Revision F.
3. Available only on Revision J.
Table 1:
Key Timing Parameters
CL = CAS (READ) latency; data-out window is MIN clock rate with 50% duty cycle at CL = 2, CL = 2.5, or CL = 3
Speed
Grade
-5B
-6
6T
-75E/-75Z
-75
CL = 2
133
133
133
133
100
Clock Rate (MHz)
CL = 2.5
167
167
167
133
133
CL = 3
200
n/a
n/a
n/a
n/a
Data-Out
Window
1.6ns
2.1ns
2.0ns
2.5ns
2.5ns
Access
Window
±0.70ns
±0.70ns
±0.70ns
±0.75ns
±0.75ns
DQSâDQ
Skew
0.40ns
0.40ns
0.45ns
0.50ns
0.50ns
PDF: 09005aef80a1d9d4/Source: 09005aef82a95a3a
512Mb_DDR_x4x8x16_D1.fm - 512Mb DDR: Rev. Q; Core DDR Rev. E 7/11 EN
1
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2000 Micron Technology, Inc. All rights reserved.
|
▷ |