PIC16F722AT-ISS Datasheet, PDF (58/286 Pages) Microchip Technology – 28-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16(L)F722A/723A
REGISTER 6-8: IOCB: INTERRUPT-ON-CHANGE PORTB REGISTER
R/W-0
IOCB7
bit 7
R/W-0
IOCB6
R/W-0
IOCB5
R/W-0
IOCB4
R/W-0
IOCB3
R/W-0
IOCB2
R/W-0
IOCB1
R/W-0
IOCB0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-0
IOCB<7:0>: Interrupt-on-Change PORTB Control bits
1 = Interrupt-on-change enabled
0 = Interrupt-on-change disabled
REGISTER 6-9: ANSELB: PORTB ANALOG SELECT REGISTER
U-0
—
bit 7
U-0
R/W-1
R/W-1
R/W-1
R/W-1
—
ANSB5
ANSB4
ANSB3
ANSB2
R/W-1
ANSB1
R/W-1
ANSB0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-6
bit 5-0
Unimplemented: Read as ‘0’
ANSB<5:0>: Analog Select between Analog or Digital Function on Pins RB<5:0>, respectively
0 = Digital I/O. Pin is assigned to port or digital special function.
1 = Analog input. Pin is assigned as analog input⁽¹⁾. Digital input buffer disabled.
Note 1: When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to
allow external control of the voltage on the pin.
DS41417B-page 58
 2010-2012 Microchip Technology Inc.