English
Language : 

PIC18LF2X Datasheet, PDF (34/44 Pages) Microchip Technology – 28/40/44-Pin, Low-Power, High-Performance Microcontrollers with XLP Technology
PIC18(L)F2X/4XK50
TABLE 5-3: PIC18(L)F2X/4XK50 BIT DESCRIPTIONS (CONTINUED)
Bit Name
Configuration
Words
Description
EBTR3
CONFIG7L Table Read Protection bit (Block 3 code memory area)
1 = Block 3 is not protected from table reads executed in other blocks
0 = Block 3 is protected from table reads executed in other blocks
EBTR2
CONFIG7L Table Read Protection bit (Block 2 code memory area)
1 = Block 2 is not protected from table reads executed in other blocks
0 = Block 2 is protected from table reads executed in other blocks
EBTR1
CONFIG7L Table Read Protection bit (Block 1 code memory area)
1 = Block 1 is not protected from table reads executed in other blocks
0 = Block 1 is protected from table reads executed in other blocks
EBTR0
CONFIG7L Table Read Protection bit (Block 0 code memory area)
1 = Block 0 is not protected from table reads executed in other blocks
0 = Block 0 is protected from table reads executed in other blocks
EBTRB
CONFIG7H Table Read Protection bit (Boot Block memory area)
1 = Boot Block is not protected from table reads executed in other blocks
0 = Boot Block is protected from table reads executed in other blocks
DEV<10:3>
DEVID2 Device ID bits
These bits are used with the DEV<2:0> bits in the DEVID1 register to
identify part number.
DEV<2:0>
DEVID1 Device ID bits
These bits are used with the DEV<10:3> bits in the DEVID2 register to
identify part number.
REV<4:0>
DEVID1 Revision ID bits
These bits are used to indicate the revision of the device.
Note 1: Minimum VDD for F devices is 2.3V.
2: When the 3x Multiplier mode is selected, the input frequency has to be 16 MHz. When the 4x Multiplier
mode is selected, the input frequency has to be between 8 MHz and 16 MHz.
3: The dedicated In-Circuit Port is available only on the 44-pin TQFP packaged devices. This bit should be
programmed to a ‘0’ in all other devices. See Section 2.2 “Dedicated ICSP/ICD Port (44-Pin TQFP
Only)” for more information.
DS41630B-page 34
 2012 Microchip Technology Inc.