English
Language : 

PIC18LF2X Datasheet, PDF (31/44 Pages) Microchip Technology – 28/40/44-Pin, Low-Power, High-Performance Microcontrollers with XLP Technology
PIC18(L)F2X/4XK50
TABLE 5-3: PIC18(L)F2X/4XK50 BIT DESCRIPTIONS (CONTINUED)
Bit Name
Configuration
Words
Description
BORV<1:0>
CONFIG2L
Brown-out Reset Voltage bits
11 = VBOR set to 1.9V(1)
10 = VBOR set to 2.2V(1)
01 = VBOR set to 2.5V
00 = VBOR set to 2.85V
BOREN<1:0>
CONFIG2L
Brown-out Reset Enable bits
11 = Brown-out Reset enabled in hardware only (SBOREN is disabled)
10 = Brown-out Reset enabled in hardware only and disabled in Sleep mode
(SBOREN is disabled)
01 = Brown-out Reset enabled and controlled by software (SBOREN is enabled)
00 = Brown-out Reset disabled in hardware and software
PWRTEN
CONFIG2L
Power-up Timer Enable bit
1 = PWRT disabled
0 = PWRT enabled
WDTPS<3:0>
CONFIG2H
Watchdog Timer Postscaler Select bits
1111 = 1:32,768
1110 = 1:16,384
1101 = 1:8,192
1100 = 1:4,096
1011 = 1:2,048
1010 = 1:1,024
1001 = 1:512
1000 = 1:256
0111 = 1:128
0110 = 1:64
0101 = 1:32
0100 = 1:16
0011 = 1:8
0010 = 1:4
0001 = 1:2
0000 = 1:1
WDTEN<1:0> CONFIG2H Watchdog Timer Enable bits
11 = WDT enabled in hardware; SWDTEN bit is disabled
10 = WDT controlled by the SWDTEN bit
01 = WDT enabled when device is active, disabled when device is in Sleep;
SWDTEN bit is disabled
00 = WDT disabled in hardware; SWDTEN bit is disabled
MCLRE
CONFIG3H
MCLR Pin Enable bit
1 = MCLR pin enabled, RE3 input pin disabled
0 = RE3 input pin enabled, MCLR pin disabled
SDOMX
CONFIG3H
SDO Output MUX bit
1 = SDO is on RB3
0 = SDO is on RC7
T3CMX
CONFIG3H
Timer3 Clock Input MUX bit
1 = T3CKI is on RC0
0 = T3CKI is on RB5
Note 1:
2:
3:
Minimum VDD for F devices is 2.3V.
When the 3x Multiplier mode is selected, the input frequency has to be 16 MHz. When the 4x Multiplier
mode is selected, the input frequency has to be between 8 MHz and 16 MHz.
The dedicated In-Circuit Port is available only on the 44-pin TQFP packaged devices. This bit should be
programmed to a ‘0’ in all other devices. See Section 2.2 “Dedicated ICSP/ICD Port (44-Pin TQFP
Only)” for more information.
 2012 Microchip Technology Inc.
DS41630B-page 31