PIC16LF1946_13 Datasheet, PDF (336/478 Pages) Microchip Technology – 64-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt XLP Technology

PIC16(L)F1946/47
TABLE 27-1: LCD SEGMENT AND DATA
REGISTERS
Device
PIC16(L)F1946/47
# of LCD Registers
Segment
Enable
6
Data
24
The LCDCON register (Register 27-1) controls the
operation of the LCD driver module. The LCDPS regis-
ter (Register 27-2) configures the LCD clock source
prescaler and the type of waveform; Type-A or Type-B.
The LCDSEn registers (Register 27-5) configure the
functions of the port pins.
The following LCDSEn registers are available:
• LCDSE0
• LCDSE1
• LCDSE2
• LCDSE3
• LCDSE4
• LCDSE5
SE<7:0>
SE<15:8>
SE<23:16>⁽¹⁾
SE<31:24>
SE<39:32>
SE<45:40>
Once the module is initialized for the LCD panel, the
individual bits of the LCDDATAn registers are
cleared/set to represent a clear/dark pixel, respectively:
• LCDDATA0 SEG<7:0>COM0
• LCDDATA1 SEG<15:8>COM0
• LCDDATA2 SEG<23:16>COM0
• LCDDATA3 SEG<7:0>COM1
• LCDDATA4 SEG<15:8>COM1
• LCDDATA5 SEG<23:16>COM1
• LCDDATA6 SEG<7:0>COM2
• LCDDATA7 SEG<15:8>COM2
• LCDDATA8 SEG<23:16>COM2
• LCDDATA9 SEG<7:0>COM3
• LCDDATA10 SEG<15:8>COM3
• LCDDATA11 SEG<23:16>COM3
• LCDDATA12 SEG<31:24>COM0
• LCDDATA13 SEG<39:32>COM0
• LCDDATA14 SEG<45:40>COM0
• LCDDATA15 SEG<31:24>COM1
• LCDDATA16 SEG<39:32>COM1
• LCDDATA17 SEG<45:40>COM1
• LCDDATA18 SEG<31:24>COM2
• LCDDATA19 SEG<39:32>COM2
• LCDDATA20 SEG<45:40>COM2
• LCDDATA21 SEG<31:24>COM3
• LCDDATA22 SEG<39:32>COM3
• LCDDATA23 SEG<45:40>COM3
As an example, LCDDATAn is detailed in
Register 27-6.
Once the module is configured, the LCDEN bit of the
LCDCON register is used to enable or disable the LCD
module. The LCD panel can also operate during Sleep
by clearing the SLPEN bit of the LCDCON register.
DS41414D-page 336
 2010-2012 Microchip Technology Inc.