PIC24HJ32GP302_12 Datasheet, PDF (300/390 Pages) Microchip Technology – 16-bit Microcontrollers (up to 128 KB Flash and 8K SRAM) with Advanced Analog

PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
TABLE 28-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
No.⁽³⁾
Typical⁽²⁾
Max
Units
Conditions
Power-Down Current (IPD)⁽¹⁾
DC60d
24
68
μA
-40°C
DC60a
DC60b
28
87
124
292
μA
+25°C
3.3V Base Power-Down Current^(3,4)
μA
+85°C
DC60c
350
1000
μA
+125°C
DC61d
8
13
μA
-40°C
DC61a
DC61b
10
15
μA
+25°C
3.3V Watchdog Timer Current: ΔIWDT^(3,5)
12
20
μA
+85°C
DC61c
13
25
μA
+125°C
Note 1: IPD (Sleep) current is measured as follows:
• CPU core is off (i.e., Sleep mode), oscillator is configured in EC mode and external clock active,
OSC1 is driven with external square wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV
required)
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to VSS
• MCLR = VDD, WDT and FSCM are disabled, all peripheral modules are disabled (PMDx bits are all
‘1’s)
• RTCC is disabled
• JTAG is disabled
2: Data in the “Typ” column is at 3.3V, +25ºC unless otherwise stated.
3: The Watchdog Timer Current is the additional current consumed when the WDT module is enabled. This
current should be added to the base IPD current.
4: These currents are measured on the device containing the most memory in this family.
5: These parameters are characterized, but are not tested in manufacturing.
DS70293G-page 300
© 2007-2012 Microchip Technology Inc.