English
Language : 

PIC24HJ32GP302_12 Datasheet, PDF (298/390 Pages) Microchip Technology – 16-bit Microcontrollers (up to 128 KB Flash and 8K SRAM) with Advanced Analog
PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
TABLE 28-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤TA ≤+125°C for Extended
Parameter
No.(3)
Typical(2)
Max
Units
Conditions
Operating Current (IDD)(1)
DC20d
18
21
mA
-40°C
DC20a
DC20b
18
22
mA
18
22
mA
+25°C
+85°C
3.3V
10 MIPS
DC20c
DC21d
18
25
mA
30
35
mA
+125°C
-40°C
DC21a
DC21b
30
34
mA
30
34
mA
+25°C
+85°C
3.3V
16 MIPS
DC21c
30
36
mA
+125°C
DC22d
34
42
mA
-40°C
DC22a
DC22b
34
41
mA
34
42
mA
+25°C
+85°C
3.3V
20 MIPS
DC22c
35
44
mA
+125°C
DC23d
DC23a
DC23b
49
58
mA
49
57
mA
49
57
mA
-40°C
+25°C
+85°C
3.3V
30 MIPS
DC23c
49
60
mA
+125°C
DC24d
63
75
mA
-40°C
DC24a
DC24b
63
74
mA
63
74
mA
+25°C
+85°C
3.3V
40 MIPS
DC24c
63
76
mA
+125°C
Note 1:
2:
3:
IDD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all IDD measurements are as follows:
• Oscillator is configured in EC mode, no PLL until 10 MIPS, OSC1 is driven with external square wave
from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to VSS
• MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (defined PMDx bits
are set to zero)
• CPU executing while(1) statement
• JTAG is disabled
Data in “Typ” column is at 3.3V, +25ºC unless otherwise stated.
These parameters are characterized but not tested in manufacturing.
DS70293G-page 298
© 2007-2012 Microchip Technology Inc.