PIC24HJ32GP302_12 Datasheet, PDF (299/390 Pages) Microchip Technology – 16-bit Microcontrollers (up to 128 KB Flash and 8K SRAM) with Advanced Analog

PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
TABLE 28-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
Standard Operating Conditions: 3.0V to 3.6V
DC CHARACTERISTICS
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
No.⁽³⁾
Typical⁽²⁾
Max
Units
Conditions
Idle Current (IIDLE): Core OFF Clock ON Base Current⁽¹⁾
DC40d
8
10
mA
-40°C
DC40a
DC40b
8
10
mA
9
10
mA
+25°C
+85°C
3.3V
10 MIPS
DC40c
10
13
mA
+125°C
DC41d
DC41a
DC41b
13
15
mA
13
15
mA
13
16
mA
-40°C
+25°C
+85°C
3.3V
16 MIPS
DC41c
13
19
mA
+125°C
DC42d
15
18
mA
-40°C
DC42a
DC42b
16
18
mA
16
19
mA
+25°C
+85°C
3.3V
20 MIPS
DC42c
17
22
mA
+125°C
DC43a
23
27
mA
+25°C
DC43d
DC43b
23
26
mA
24
28
mA
-40°C
+85°C
3.3V
30 MIPS
DC43c
25
31
mA
+125°C
DC44d
31
42
mA
-40°C
DC44a
DC44b
31
36
mA
32
39
mA
+25°C
+85°C
3.3V
40 MIPS
DC44c
34
43
mA
+125°C
Note 1:
2:
3:
Base IIDLE current is measured as follows:
• CPU core is off (i.e., Idle mode), oscillator is configured in EC mode and external clock active, OSC1
is driven with external square wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV
required)
• CLKO is configured as an I/O input pin in the Configuration word
• External Secondary Oscillator disabled (i.e., SOSCO and SOSCI pins configured as digital I/O inputs)
• All I/O pins are configured as inputs and pulled to VSS
• MCLR = VDD, WDT and FSCM are disabled
• No peripheral modules are operating; however, every peripheral is being clocked (defined PMDx bits
are set to zero)
• JTAG is disabled
Data in “Typ” column is at 3.3V, +25ºC unless otherwise stated.
These parameters are characterized but not tested in manufacturing.
© 2007-2012 Microchip Technology Inc.
DS70293G-page 299